PatoV6´s Ranger - July 07 TOTM UPDATE !!

[patov6]

UPDATE:

New bumpers, rocksliders, winch reallocation, etc....

http://www.desmontados.cl/files/pa102036_small_428.jpg
http://www.desmontados.cl/files/pa102035_small_160.jpg
http://www.desmontados.cl/files/pa102034_small_206.jpg
http://www.desmontados.cl/files/pa102044_small_143.jpg
http://www.desmontados.cl/files/pa102042_small_283.jpg
http://www.desmontados.cl/files/pa102041_small_308.jpg
http://www.desmontados.cl/files/pa102040_small_275.jpg
http://www.desmontados.cl/files/pa102039_small_317.jpg
http://www.desmontados.cl/files/pa102038_small_231.jpg
http://www.desmontados.cl/files/pa102037_small_321.jpg

[Sunk]

I like that rear bumper, looks beefy.

Oh yeah, nice truck too.

[WTCBST]

i like the way the bumper protects the bottom of the bedside. wered you get those sliders?

[dogboy]

i like the way the bumper protects the bottom of the bedside. wered you get those sliders?

As far as I know they came from a saw and a welder...
I am guessing that becuase he had a thread and he was showing his front bumper biuld up. I would think he made those at the same time.

[patov6]

Thanks guys...yes, front/rear bumpers & rocksliders were made at the same time ;)

[LIMA BEAN]

Looks good. I like the bumpers and sliders, mine is going through that proccess right now.

[camodown]

very nice, I like how the rear bumper protects the bottom as well. Great design.

Looks like your fenders sliced your front driver tire a little, hate when that happens

Oh yeah, lets get some more videos of that bad boy in action haha

[patov6]

Looks like your fenders sliced your front driver tire a little, hate when that happens


Hi...nop, Iroks are like that....:headbang:

http://www.intercotire.com/piclib/530.jpg

[camodown]

That is what I thought at first, haha shows what I know, how are they holding up on the road. I want some but don't think they will last long enough on a DD

[patov6]

That is what I thought at first, haha shows what I know, how are they holding up on the road. I want some but don't think they will last long enough on a DD

Hehehehe....for a DD...:bsflag:

[zainyD]]

Great truck Patov!!!! Definitely one of my favorites on this site.

[compleckz]

man the bumpers came out good, sliders too.. :pray:

[WTCBST]

As far as I know they came from a saw and a welder...
I am guessing that becuase he had a thread and he was showing his front bumper biuld up. I would think he made those at the same time.

oh

[patov6]

man the bumpers came out good, sliders too.. :pray:

Thanks Man ;)

[patov6]

;27147']Great truck Patov!!!! Definitely one of my favorites on this site.


Thanks again! :clapping:

[Hahnsb2]

Looking good! Nice to see you did something with that exhaust too :icon_thumby:

[patov6]

Week end testing!

http://www.desmontados.cl/files/pato_v6_634.jpg

:icon_hornsup:

[samsonitesamsonite]

holy shit...

[94STXRanger]

Week end testing!

http://www.desmontados.cl/files/pato_v6_634.jpg

:icon_hornsup:

... now what guys? lol

[compleckz]

more pics :headbang:

[metalmacguyver]

Must See More!!!

[wheelin42001]

Sick build, sick truck.. what's the overall height?

[AngloSaxon]

holy shit...

took the words right out of my mouth

[Jspafford]

The sliders are nice.. are they powder coated? It's hard to tell.

[Not All There]

you take that thing into some awesome places, always like to see its progress and where it travels to and threw.

[Bray D]

damn pato, I remember when we were bidding for the locked 4.56 d35 on ebay. now you're all linked up on full widths. I enjoy the updates, and the wheeling pics. I wouldn't dream of taking my truck over that haha. your truck is one of my favorites on the site, keep up the good work and keep the pics coming!!

[Chic N Stew]

man, that a good looking truck, thats what i want mine to look like when im done with it

[patov6]

Sick build, sick truck.. what's the overall height?

Thanks! We use metric system...192 cms...I think 6'3"..

took the words right out of my mouth

Thanks man!

The sliders are nice.. are they powder coated? It's hard to tell.

Nop..just painted black...not worth...they are going to be destroyed soon...hehehe.

you take that thing into some awesome places, always like to see its progress and where it travels to and threw.

Thanks man! The idea is to built and test..;)

damn pato, I remember when we were bidding for the locked 4.56 d35 on ebay. now you're all linked up on full widths. I enjoy the updates, and the wheeling pics. I wouldn't dream of taking my truck over that haha. your truck is one of my favorites on the site, keep up the good work and keep the pics coming!!

Wow!!! 2 years ago redro...Bray? I will post the next upg soon...GM14 rear ;)

man, that a good looking truck, thats what i want mine to look like when im done with it

Thank you very much! You are going to do it man!

[Todd]

Ya, pato I remember back to those days too. Truck has come a long way. I really like the stance your truck has, nice and wide and not to high. Good work man.

One question, how do you have 125:1 crawl. I know you have a doubler. Is it something other then a 1350/1354, maybe something with a lower low range to get you to 125?

[patov6]

Ya, pato I remember back to those days too. Truck has come a long way. I really like the stance your truck has, nice and wide and not to high. Good work man.

One question, how do you have 125:1 crawl. I know you have a doubler. Is it something other then a 1350/1354, maybe something with a lower low range to get you to 125?

Todd...thanks. The idea was not to elevate de GC, in fact with the FW axles, is better than before :;
My doubler setup is a D20 (Bronco) and the BW 1354.

http://www.twistedandes.com/foro/attachment.php?attachmentid=4994&stc=1&d=1152042652

http://img293.imageshack.us/img293/4846/img0040iz4.jpg

Bye ;)

[wheelin42001]

very impressive, nice and short!

[Jim Oaks]

Todd...thanks. The idea was not to elevate de GC, in fact with the FW axles, is better than before :;
My doubler setup is a D20 (Bronco) and the BW 1354.

http://www.twistedandes.com/foro/attachment.php?attachmentid=4994&stc=1&d=1152042652

http://img293.imageshack.us/img293/4846/img0040iz4.jpg

Bye ;)

HOLD UP THERE!

:stop: How did you double a D20 and BW1354? :woot:

I gotta know!

[CopyKat]

HOLD UP THERE!

:stop: How did you double a D20 and BW1354? :woot:

I gotta know!

Look through your backups. He posted a bunch of pictures about a year ago now.:icon_cheers:

[Jim Oaks]

Forum backups. You're a freakin commedian.

[-ROKTOY-]

Very nice truck! Very low stance... :icon_thumby:

[patov6]

Forum backups. You're a freakin commedian.

If is ok for you, I will post a particular thread of the Doubler built :) and invite my friend Victor Silva, who is the creator of this doubler, to participate in that thread.

Pato

[dirtraider]

doooo it

[patov6]

doooo it

:tease:

[Jim Oaks]

If is ok for you, I will post a particular thread of the Doubler built :) and invite my friend Victor Silva, who is the creator of this doubler, to participate in that thread.

Pato

That's cool. There's info on the 1350/1354 doubler. I'm sure people would like to know about other options.

[patov6]

Update. Beefing F/R axles....

Front: Dana 44 - CrMo Axles & Super Yukon Ujoints
Rear: Shaved GM14

[patov6]

Update. Beefing F/R axles....

Front: CrMo Axles & Super Yukon Ujoints
Rear: GM14

http://www.desmontados.cl/files/transfer_079_small_183.jpg
http://www.desmontados.cl/files/transfer_078_small_293.jpg
http://www.desmontados.cl/files/gm14_275.jpg
http://img528.imageshack.us/img528/287/gm14iom1.jpg
http://www.desmontados.cl/files/hpim3564_162.jpg
http://www.desmontados.cl/files/hpim3571_762.jpg

Principal Objective is Off Road Reliability (I will stick with Iroks 36x13,5...I guess so)

[dirtraider]

looking good sir!


ps write up on doubler

[patov6]

ps write up on doubler

Ok! In a few days i hope...

[patov6]

looking good sir!


ps write up on doubler


http://www.therangerstation.com/forums/showthread.php?t=9843 ;)

[c_note]

pato, that bumper reminds me of something.............. oh ya, mine! i like! where did you get the design? i designed it similar to the allprooffroad bumper for the tacoma.

http://img409.imageshack.us/img409/6333/bumperno6.png (http://imageshack.us)

http://img134.imageshack.us/img134/2146/bumper2xu0.png (http://imageshack.us)

[patov6]

pato, that bumper reminds me of something.............. oh ya, mine! i like! where did you get the design? i designed it similar to the allprooffroad bumper for the tacoma.

http://img409.imageshack.us/img409/6333/bumperno6.png (http://imageshack.us)

http://img134.imageshack.us/img134/2146/bumper2xu0.png (http://imageshack.us)

Cool!!! ;)

Update...with GM14 ready to Rock & Roll....:headbang:

http://img98.imageshack.us/img98/7304/recorrdile9.jpg

[Bray D]

looks great, you definitely shouldn't have any troubles with that GM14 as far as reliability.

[patov6]

Well after a few month (and after a D44 pig head breakage) I started the rebuild...
The idea is to change the front susp from 4link to 3 link, and 14" bilsteins. I think is going to flex better. Another thing, is the UPG from 36x13.5 iroks to 38,5x14,5 TSL SX`s...
I´m little worried about the steering, but...we`ll see...

pics..

http://www.desmontados.cl/files/p5162685_medium_309.jpg

http://www.desmontados.cl/files/img00025_134.jpg

http://www.desmontados.cl/files/getattachment_215.jpg

http://www.desmontados.cl/files/getattachment1_307.jpg

[JohnnyU]

Looking good as usual Pato!!

I think that you'll be pleasantly surprised by the 3-link's performance.... :headbang:

[patov6]

Looking good as usual Pato!!

I think that you'll be pleasantly surprised by the 3-link's performance.... :headbang:

Thanks a lot! I hope so... :headbang:

More pics...now with the 38,5 TSL SX...

http://www.twistedandes.com/foro/attachment.php?attachmentid=36040&stc=1&d=1215477491

http://www.twistedandes.com/foro/attachment.php?attachmentid=36041&stc=1&d=1215478183

[compleckz]

does it still fit in the parking garage? :icon_cheers:

[patov6]

does it still fit in the parking garage? :icon_cheers:


I think...yes! My goal is 194 cm or 76.4 in or 6.36 ft..let`s see!:icon_cheers:

[Gabe8810]

wow i love that truck i like the width of the wheel base.

[metalmacguyver]

Amazing man. Just amazing.

[wizkid00104]

Is the front axle much wider than the rear or is it just the photo? BTW that thing is a beast!

[patov6]

Is the front axle much wider than the rear or is it just the photo? BTW that thing is a beast!

Pic effect. Trussed D44 FW front + GM14bolt rear....thanks!

[Bray D]

Looking good as usual Pato!!

I think that you'll be pleasantly surprised by the 3-link's performance.... :headbang:

I don't think the changing the link configuration alone will improve articulation too much, especially running the same spring. Unless the 14" Bilstein is an air shock that I'm not aware of, in which case, please excuse my ignorance lol.

[whitebassbenny]

wow very nice !!!!

[patov6]

Looking good as usual Pato!!

I think that you'll be pleasantly surprised by the 3-link's performance.... :headbang:

Well Johnny, I took a loooong time to retake this project, but its almost done...

Soon RTI pics...

http://www.twistedandes.com/foro/attachment.php?attachmentid=40733&stc=1&d=1220489905

http://www.twistedandes.com/foro/attachment.php?attachmentid=40239&stc=1&d=1220040402

[AgPete139]

Patov, the weather, presidents, and seasons will always change, but the quality of your work will not. Your truck is still one of my personal favorites, and I can't wait to see your articulation pics with the 38's & 14 bolt. :wub: :pray:

Happy crawling!





Pete



.

[badblue]

time for some more trimming i think. Your truck is in my top three TOTM ever.

the truck on unamogs
punisher
patov6

[patov6]

Patov, the weather, presidents, and seasons will always change, but the quality of your work will not. Your truck is still one of my personal favorites, and I can't wait to see your articulation pics with the 38's & 14 bolt. :wub: :pray:

Happy crawling!

Pete

.

thanks Pete!!:icon_thumby:

time for some more trimming i think. Your truck is in my top three TOTM ever.

the truck on unamogs
punisher
patov6

Thanks Badblue! :icon_thumby:

[patov6]

http://www.twistedandes.com/foro/attachment.php?attachmentid=40846&stc=1&d=1220739571

http://www.twistedandes.com/foro/attachment.php?attachmentid=40847&stc=1&d=1220739571
http://www.twistedandes.com/foro/attachment.php?attachmentid=40848&stc=1&d=1220739571
http://www.twistedandes.com/foro/attachment.php?attachmentid=40849&stc=1&d=1220739571
http://www.twistedandes.com/foro/attachment.php?attachmentid=40850&stc=1&d=1220739571
http://www.twistedandes.com/foro/attachment.php?attachmentid=40851&stc=1&d=1220739571
http://www.twistedandes.com/foro/attachment.php?attachmentid=40852&stc=1&d=1220741792
http://www.twistedandes.com/foro/attachment.php?attachmentid=40853&stc=1&d=1220741792

BTW "Antes=Before and Despues=After"

[wahlstrom1]

Not only does your truck kick ass, I'm liking the land cruiser and Hilux in the backround too....

-andrew

[JohnnyU]

Pato, looks awesome as usual. :pray:

Have you had any issues with the Superwinch hubs? I've been thinking about getting a set for my 60.

[motohead771]

WOW, it's so beautiful! Awsome truck Pato!

[patov6]

Pato, looks awesome as usual. :pray:

Have you had any issues with the Superwinch hubs? I've been thinking about getting a set for my 60.

Hi Johnny! About the SW hubs...so far, so good..no issues reported. Please avoid milemarker...I had wo breakages when I had the TTB;brownbag;

Everytime you mention D60...I feel envy!!:drool:

You were 100% right about the 3 link behaviour!

Pato http://www.therangerstation.com/forums/images/smilies/headbang.gif

[patov6]

WOW, it's so beautiful! Awsome truck Pato!

:icon_thumby:

[patov6]

Week end wheeling...
:3gears:



http://www.desmontados.cl/files/ranger_236.jpeg

http://www.desmontados.cl/files/shangrila28092008_06_216.jpg

http://www.desmontados.cl/files/shangrila28092008_17_191.jpg

http://www.desmontados.cl/files/shangrila_sept_008_medium_203.jpg

[BlackBII]

:drool:

Soooooo bitchin

[TrucksGetDirty]

Holy Cheese... your truck is a-fcking-mazing.

[WhiteRanger4x4]

Now that SOME FLEX !!

[zainyD]]

Great work as always!!!!! Love your truck!

How did you go about repairing the first D44 that you broke? Did you retube another axle or find a driver's side drop D44 out of a Jeep or Ford?

[patov6]

Great work as always!!!!! Love your truck!

How did you go about repairing the first D44 that you broke? Did you retube another axle or find a driver's side drop D44 out of a Jeep or Ford?

Thanks dude!:icon_thumby:
I used another D44, and retubed again. BUT now , cuttin, reinforcing and welding the tubes, and not extracting the tubes from the pig head..:rolleyes: and exhange them from one side to another..and used the CrMo shafts, the ARB, and the knuckles from the dead axle..

http://www.twistedandes.com/foro/attachment.php?attachmentid=42615&stc=1&d=1222904334

[AngloSaxon]

It has been a while sense I've seen an update on the monster, looks great and good work as always.....but, no half-doors?? I thought that was part of the upgrade?

[Mechanickid]

that thing is fckin unstoppable!

[metalmacguyver]

Sick!



More pictures!


BTW, your truck is one of several that I have influenced my build so far.

[patov6]

It has been a while sense I've seen an update on the monster, looks great and good work as always.....but, no half-doors?? I thought that was part of the upgrade?
thnks. half doors not yet but soon ;)

[AngloSaxon]

Week end testing!

http://www.desmontados.cl/files/pato_v6_634.jpg

:icon_hornsup:

I have to say that this has to be the coolest offroad pic to this day. Everytime I see it, it makes me feel all warm inside. :drool:

[whitebassbenny]

damnnnnn nice

[patov6]

I have to say that this has to be the coolest offroad pic to this day. Everytime I see it, it makes me feel all warm inside. :drool:


hehehe...is nice for an oil change... :icon_thumby:

[patov6]

Sick!



More pictures!


BTW, your truck is one of several that I have influenced my build so far.

Thanks a lot for your kind words...

[airborn_ranger]

Hey PatoV6--Great to see you again! Lost track of you after the provider upgrade. I want to complete the same SAS you did using a GM front axle with passenger-side drop, but switching the tubes and axle shafts...how did that work out? Would you do it again? What about cost--would it be less expensive to buy a Dynatrac?

[Not All There]

awesome as always man!

[patov6]

awesome as always man!


Poser pics (weekend...)

http://www.twistedandes.com/foro/attachment.php?attachmentid=44780&stc=1&d=1224463203

http://www.twistedandes.com/foro/attachment.php?attachmentid=44781&stc=1&d=1224463203

[patov6]

Hey PatoV6--Great to see you again! Lost track of you after the provider upgrade. I want to complete the same SAS you did using a GM front axle with passenger-side drop, but switching the tubes and axle shafts...how did that work out? Would you do it again? What about cost--would it be less expensive to buy a Dynatrac?

cool...:icon_thumby:

Very very cheap compared with a Dynatrac! So far so good :icon_thumby:

[patov6]

Well...after the last rock crawling ride, I realized that 126.5" of wheelbase is too long for that kind of routes. So, I´ve decided to short it. Yeah..I know is not so beatiful, but I´m looking for performance on the trail. So the objective is 115". This is my new project:

OBJECTIVE:
http://img113.imageshack.us/img113/1559/shorterwbiimediumsmall.jpg (http://img113.imageshack.us/my.php?image=shorterwbiimediumsmall.jpg)
http://img113.imageshack.us/img113/shorterwbiimediumsmall.jpg/1/w640.png (http://g.imageshack.us/img113/shorterwbiimediumsmall.jpg/1/)

http://img2.imageshack.us/img2/529/shorterwbsmall.jpg (http://img2.imageshack.us/my.php?image=shorterwbsmall.jpg)
http://img2.imageshack.us/img2/shorterwbsmall.jpg/1/w456.png (http://g.imageshack.us/img2/shorterwbsmall.jpg/1/)

http://img408.imageshack.us/img408/5084/shorterwbiv.jpg (http://img408.imageshack.us/my.php?image=shorterwbiv.jpg)
http://img408.imageshack.us/img408/shorterwbiv.jpg/1/w592.png (http://g.imageshack.us/img408/shorterwbiv.jpg/1/)

[patov6]

1st
http://img408.imageshack.us/img408/2489/primeraparte.jpg

2nd
http://img2.imageshack.us/img2/9172/segundapartek.jpg

3rd
http://img165.imageshack.us/img165/7941/terceraparte.jpg

4th
http://img89.imageshack.us/img89/7641/cuartaparte.jpg

[AgPete139]

Nice update Patov. Haven't seen it in a while...

[patov6]

more updates:

http://img40.imageshack.us/img40/8880/p5213749medium.jpg (http://img40.imageshack.us/my.php?image=p5213749medium.jpg)
http://img40.imageshack.us/img40/p5213749medium.jpg/1/w640.png (http://g.imageshack.us/img40/p5213749medium.jpg/1/)

http://img37.imageshack.us/img37/7711/p5203742medium.jpg (http://img37.imageshack.us/my.php?image=p5203742medium.jpg)
http://img37.imageshack.us/img37/p5203742medium.jpg/1/w640.png (http://g.imageshack.us/img37/p5203742medium.jpg/1/)

http://img42.imageshack.us/img42/3232/p5203741medium.jpg (http://img42.imageshack.us/my.php?image=p5203741medium.jpg)
http://img34.imageshack.us/img34/40/p5213751medium.jpg (http://g.imageshahttp://img34.imageshack.us/img34/p5213751medium.jpg/1/w640.png[/IMG] (http://g.imageshack.us/img34/p5213751medium.jpg/1/)ck.us/img42/p5203741medium.jpg/1/]http://img42.imageshack.us/img42/p5203741medium.jpg/1/w640.png

[patov6]

Almost done!

http://img188.imageshack.us/img188/2230/img00071medium.jpg

[patov6]

Nice update Patov. Haven't seen it in a while...

Cool Pete:icon_thumby:

[compleckz]

i love it pato.. i want to do this to mine!

[patov6]

i love it pato.. i want to do this to mine!

hehehe...motivated!! :headbang:

[patov6]

Well, its almost done. First light test with shortened chassis,

http://www.youtube.com/watch?v=pkZI7fgvjkA


Regards

Pato

[koda6966]

I think it looks pretty good shortened.

I'd be more careful on steep inclines though, I've seen guys topple full length rangers.

[patov6]

More pics:

http://www.twistedandes.com/foro/attachment.php?attachmentid=60256&stc=1&d=1244468913

http://www.twistedandes.com/foro/attachment.php?attachmentid=60257&stc=1&d=1244468913

http://www.twistedandes.com/foro/attachment.php?attachmentid=60258&stc=1&d=1244468913

http://www.twistedandes.com/foro/attachment.php?attachmentid=60261&stc=1&d=1244468913

http://www.twistedandes.com/foro/attachment.php?attachmentid=60268&stc=1&d=1244471440

And a crazy friend!

http://www.twistedandes.com/foro/attachment.php?attachmentid=60269&stc=1&d=1244471440

[wizkid00104]

Is that street legal in Chile?

[compleckz]

lol walking the ranger


looks great pato, good work

[crawlin91]

Id probably shorten the rear end of my ranger if I hadnt bought the B2. besides its good for haulin shit.your truck is sick btw.

[krazykracker]

Patov6-i wish i had the skills & tools to create something like that.

got any pics of when you cut your fenders?

[bombsquad]

sssssssssssssssssssswwwwwwwwwwwwwwwwweeeeeeeeeeeee eeeeeeeeeeeetttttt truck bro

[metalmacguyver]

Do you have any pictures of the frame and how it was shortened?

[Bray D]

Do you have any pictures of the frame and how it was shortened?

Post #88.

Pato - :icon_thumby:

[metalmacguyver]

Post #88.

Pato - :icon_thumby:

:blush:


Thanks man.

I like it more and more Pato.:icon_thumby: :icon_welder:

[patov6]

Is that street legal in Chile?

mmmm....almost hehehehe....

lol walking the ranger

looks great pato, good work

Id probably shorten the rear end of my ranger if I hadnt bought the B2. besides its good for haulin shit.your truck is sick btw.

Thanks a lot!

Patov6-i wish i had the skills & tools to create something like that.

got any pics of when you cut your fenders?

I think in the first posts...thanks.

Do you have any pictures of the frame and how it was shortened?

sssssssssssssssssssswwwwwwwwwwwwwwwwweeeeeeeeeeeee eeeeeeeeeeeetttttt truck bro

Post #88.

Pato - :icon_thumby:

:blush:


Thanks man.

I like it more and more Pato.:icon_thumby: :icon_welder:

Thanks a lot friends!

[patov6]

Update...

BUMPSTOPS

http://www.twistedandes.com/foro/attachment.php?attachmentid=63000&stc=1&d=1247283347

V8 INSIDE

http://www.twistedandes.com/foro/attachment.php?attachmentid=64083&stc=1&d=1248572179

http://www.twistedandes.com/foro/attachment.php?attachmentid=64311&stc=1&d=1248817527

http://www.twistedandes.com/foro/attachment.php?attachmentid=64312&stc=1&d=1248817527

AOD recently overhauled and Transpack pending

http://www.twistedandes.com/foro/attachment.php?attachmentid=64356&stc=1&d=1248832255

http://www.twistedandes.com/foro/attachment.php?attachmentid=64357&stc=1&d=1248832255

http://www.twistedandes.com/foro/attachment.php?attachmentid=64358&stc=1&d=1248832255

http://www.twistedandes.com/foro/attachment.php?attachmentid=64361&stc=1&d=1248832255

http://www.twistedandes.com/foro/attachment.php?attachmentid=64453&stc=1&d=1248957525

http://www.twistedandes.com/foro/attachment.php?attachmentid=64547&stc=1&d=1249095388

http://www.twistedandes.com/foro/attachment.php?attachmentid=64550&stc=1&d=1249095388

http://www.twistedandes.com/foro/attachment.php?attachmentid=65078&stc=1&d=1249764090

http://www.twistedandes.com/foro/attachment.php?attachmentid=65112&stc=1&d=1249863115

http://www.twistedandes.com/foro/attachment.php?attachmentid=66425&stc=1&d=1250901113

http://www.twistedandes.com/foro/attachment.php?attachmentid=66426&stc=1&d=1250901113

MSD KIT IN!!!

http://www.twistedandes.com/foro/attachment.php?attachmentid=66427&stc=1&d=1250901113

http://www.twistedandes.com/foro/attachment.php?attachmentid=66462&stc=1&d=1250983830

http://www.twistedandes.com/foro/attachment.php?attachmentid=66951&stc=1&d=1251324256

DANA 60 HP INSIDE


http://www.twistedandes.com/foro/attachment.php?attachmentid=66978&stc=1&d=1251381324

http://www.twistedandes.com/foro/attachment.php?attachmentid=66979&stc=1&d=1251381324

http://www.twistedandes.com/foro/attachment.php?attachmentid=66980&stc=1&d=1251381324

[PaleBlue90]

holy crap, talk about goodies!!

[patov6]

Update:

EFI wiring done!
Shifter presented :headbang:

http://www.twistedandes.com/foro/attachment.php?attachmentid=67660&stc=1&d=1252279727

http://www.twistedandes.com/foro/attachment.php?attachmentid=67661&stc=1&d=1252279727

http://www.twistedandes.com/foro/attachment.php?attachmentid=67662&stc=1&d=1252279727

http://www.twistedandes.com/foro/attachment.php?attachmentid=67664&stc=1&d=1252279727

[metalmacguyver]

Sweet.

[Fx4wannabe01]

holy shit this is badass!!

[Bray D]

Damn Pato, always one step ahead haha. This is gonna be one serious rig after these mods (not that it wasn't already). Keep the updates comin :icon_thumby:

[patov6]

Damn Pato, always one step ahead haha. This is gonna be one serious rig after these mods (not that it wasn't already). Keep the updates comin :icon_thumby:

hahahaha...thanks Bray! I think even better than the 5.8w swap, will be the front Dana 60 :headbang:

Your rig is getting sweet too!:icon_welder:

[patov6]

More pics...

-Wiring must be "clean"
-Oil filter realocation
-ECU connected

http://www.twistedandes.com/foro/attachment.php?attachmentid=68765&stc=1&d=1253415366
http://www.twistedandes.com/foro/attachment.php?attachmentid=68766&stc=1&d=1253415366
http://www.twistedandes.com/foro/attachment.php?attachmentid=68767&stc=1&d=1253415366
http://www.twistedandes.com/foro/attachment.php?attachmentid=68768&stc=1&d=1253415366
http://www.twistedandes.com/foro/attachment.php?attachmentid=68770&stc=1&d=1253415366

[jaymegriffiths]

looks awesome nice wiring. good work!

[Vicho]

http://www.youtube.com/watch?v=az85aKzkmeo
:yahoo:

[Bray D]

:chills:

[zainyD]]

This truck is the baddest thing on this site, I love it!

[rangertoy]

very nice!!

[patov6]

;537813']This truck is the baddest thing on this site, I love it!

Thank you!!! :headbang:

[patov6]

Final specs (to be done),
Ford Ranger 4x4 1997
V8 5.8 EFI
Axles: Front Dana 60 HP F-350 97, 5.13 gears (E-Locker maybe??) & Rear GM 14 bolt - shaved - 5.13 gears and Detroit Locker.
Susp: Front and rear 3 Link + Panhard
Trans: AOD (Overhauled + Transgo) + CCG Doubler (BW 1354 + D20)
Body: Body Lift 3" + Shortened Chassis to 115" + Bobbed pickup
Tires: 39.5 x 13.5 Iroks
Wheels: Trailready 12" Beadlocks

[cargs]

you need to change your name to patov8 now!

[patov6]

you need to change your name to patov8 now!

hahahaha.....good point!:headbang:
Pato

[patov6]

Some Updates...
5.8 almost done
Dana 60 presented
Iroks 39.5 + Trailready beadlocks on!

http://img691.imageshack.us/img691/7177/p1040641small.jpg
Shot with DMC-TZ5 (http://profile.imageshack.us/camerabuy.php?model=DMC-TZ5&make=Panasonic) at 2009-11-07

http://img692.imageshack.us/img692/6072/p1040640small.jpg
Shot with DMC-TZ5 (http://profile.imageshack.us/camerabuy.php?model=DMC-TZ5&make=Panasonic) at 2009-11-07

http://img690.imageshack.us/img690/8928/p1040639small.jpg
Shot with DMC-TZ5 (http://profile.imageshack.us/camerabuy.php?model=DMC-TZ5&make=Panasonic) at 2009-11-07

http://img690.imageshack.us/img690/5720/p1040638small.jpg
Shot with DMC-TZ5 (http://profile.imageshack.us/camerabuy.php?model=DMC-TZ5&make=Panasonic) at 2009-11-07

[zainyD]]

Great!!!! I love how the truck keeps evolving into something bigger and better!!!

[PaleBlue90]

wow!

[Toms984x4]

:pray::pray::pray:

[RocKrawler]

Final specs (to be done),
Ford Ranger 4x4 1997
V8 5.8 EFI
Axles: Front Dana 60 HP F-350 97, 5.13 gears (E-Locker maybe??) & Rear GM 14 bolt - shaved - 5.13 gears and Detroit Locker.
Susp: Front and rear 3 Link + Panhard
Trans: AOD (Overhauled + Transgo) + CCG Doubler (BW 1354 + D20)
Body: Body Lift 3" + Shortened Chassis to 115" + Bobbed pickup
Tires: 39.5 x 13.5 Iroks
Wheels: Trailready 12" Beadlocks

Did you have to do the body lift to clear the engine or rear suspension, or is it just to keep the COG low? I know its likely very tight to get the multilink under the full steel bed!

[AgPete139]

As always, good job, Patov...

Pete

[86ford]

Keeping it looking clean and making most of us look like bitches all at once. Good job! If I only had that much attention to detail my rigs mite last more than 6 months.

86

[detty_motorsports]

sweet action..... that truck rocks....