PDA

View Full Version : PCV Grommet


woodthecker
10-08-2007, 09:52 PM
Does anyone where you can get the grommet for the PCV? Will one from another engine work? What engine? I have tried local auto parts and Ford dealers with no luck. Thanks in advance for any help!!

Wicked_Sludge
10-08-2007, 10:05 PM
id suggest finding a better parts store. something that simple should be easy to match up (even if they have to sell you a grommet from a different application).

woodthecker
10-09-2007, 07:04 AM
That is what I was thinking, but neither Napa or Advance had a grommet that they were willing to sell.

85_Ranger4x4
10-09-2007, 09:08 AM
Measure the hole in the valve cover and the diameter of the pvc valve, with those diminsions they should be able to find you something. I went thru the same thing on my 2.8, I had to force feed them what I needed because they couldn't find it otherwise.

COPPERHEAD85
10-09-2007, 09:28 AM
ive got an extra moroso........i think its the same thing.......its a plug type that you trim out the bottom to fit the pcv...................let me know if you cant find one ill mail it to ya

enginepaul
10-09-2007, 03:26 PM
I used this info - that I got here a while back. Don't thank me, I'm not the original poster:

The PCV Valve grommet that I got is marketed by "HELP!" (you know, the red packs with the white letters) and the part number is (drum roll please), 42066. The package also listed a Dorman number of 495-002. (which could be available elsewhere...)

Otherwise, measure and make do - it isn't a critical part, it just has to be close to work properly.

skippy
10-11-2007, 07:00 PM
page 42,lmc truck ranger catalog.

woodthecker
10-11-2007, 09:10 PM
Thanks for the help