2 weeks after it started to have very short engine cutoffs it finally threw a code. Anyone else get this code?
P0108 code
- Thread starter Ferris Bueller
- Start date
- Joined
- Jan 5, 2008
- Messages
- 20
- Points
- 3,101
- Vehicle Year
- 2008
- Transmission
- Manual
Look for a vacuum leak!
That code concerns the reading from your MAP (manifold absolute pressure) sensor. P0108 says it's too high. Because your intake is under a vacuum, which is negative pressure, that reading indicates that you are losing vacuum. (i.e., high reading means low vacuum)
Of course the sensor could be bad - but, when they go it's usually not intermittent. I'd look for cracked vacuum hoses or a malfunctioning IAC (that's the little "cylinder" directly down-stream from the throttle body).
That code concerns the reading from your MAP (manifold absolute pressure) sensor. P0108 says it's too high. Because your intake is under a vacuum, which is negative pressure, that reading indicates that you are losing vacuum. (i.e., high reading means low vacuum)
Of course the sensor could be bad - but, when they go it's usually not intermittent. I'd look for cracked vacuum hoses or a malfunctioning IAC (that's the little "cylinder" directly down-stream from the throttle body).
Sponsored Ad
TRS Events & Gatherings
Latest posts
-
-
-
-
-
-
Duraflex Hood - anyone have one?- Latest: PetroleumJunkie412
-
-
-
Featured Rangers
TRS Latest Video
Official TRS Merchandise
Follow TRS On Instagram
