wheel adapters

badblue · Dec 16, 2008

any one seen some that makes a 8x6.5 to 8x170 1.5in adapters.
I wound like to run the 14blot rear i have but it is 3in narwer and 8x6.5 and my front is 8x170.

alaskan155 · Dec 16, 2008

thats gonna be a hard one since your only moving the lug rufly .19 inches out so about 2/10 of a inch, might be able to elongate the lug holes in the rim and get away with that and just run a normal spacer or a different hub on the 14 bolt
http://www.pirate4x4.com/tech/billavista/14b_bible/index.html

95XL · Dec 17, 2008

Yes they do. I believe they make them both ways, so, you could either stick with the 8 on 170 all the way around, or switch to 8 on 6.5 all the way around. Search around on Ebay, they have everything, even though most stuff is rediculously overpriced.

Alaskan, it really isnt that hard of an adaptor to make, since both patterns are an 8 lug pattern, you would have the smaller diameter bolt circle, with 45º between each wheel stud, then you take the larger diamter bolt circle and put the holes for the stock wheel studs to stick through 22.5º off from the smaller bolt circle. It's kind of hard to explain with words, a lot easier with a picture.

wheel adapters

badblue

15+ Year Member

alaskan155

15+ Year Member

95XL

15+ Year Member

Sponsored Ad

TRS Events & Gatherings

Latest posts

Featured Rangers

TRS Latest Video

Official TRS Merchandise

Follow TRS On Instagram

Latest Album Photos

Product Suggestions