• Welcome Visitor! Please take a few seconds and Register for our forum. Even if you don't want to post, you can still 'Like' and react to posts.

A4Ld Help


nick344

New Member
Joined
Jun 23, 2008
Messages
98
Reaction score
0
Points
0
Location
alabama
Vehicle Year
1993
Make / Model
ford
Engine Size
3.0
Transmission
Automatic
Here is what i got 93 4x4 with a A4ld. I have a rattling type of noise coming from the tc and flexplate area of my truck. Sounded like a cracked flexplate it did not stay contant will come and go will not do it at higher rpms. i pulled tranny exepting to find bad flexplate but it looked good. any ideal what could be causing this noise.no real problems with the shifting of tranny kinda hard when you first put in gear other than that it seems to be working fine. fluid was dark did not smell burnt. would this be a bad tc ?
 


maximum

New Member
Joined
Dec 7, 2008
Messages
23
Reaction score
0
Points
0
Vehicle Year
1991 ford range
Transmission
Automatic
I had a Grand am making the same noise and it was the TC !
 

Explorin94

Active Member
Law Enforcement
Firefighter
EMT / Paramedic
U.S. Military - Veteran
Solid Axle Swap
Joined
Aug 7, 2007
Messages
2,243
Reaction score
19
Points
38
Age
52
Location
Farmington Il.
Vehicle Year
1988
Make / Model
Ford
Engine Size
4.0
Transmission
Automatic
Does it sound like a bunch of rocks in a drum? If it does, yes you have a bad TC.
 

nick344

New Member
Joined
Jun 23, 2008
Messages
98
Reaction score
0
Points
0
Location
alabama
Vehicle Year
1993
Make / Model
ford
Engine Size
3.0
Transmission
Automatic
it does what kinda of damage could this cause?? my dad drove with it like this for awhile since i got bought it from him i have not drove it.
 

maximum

New Member
Joined
Dec 7, 2008
Messages
23
Reaction score
0
Points
0
Vehicle Year
1991 ford range
Transmission
Automatic
if your lucky, you just have to replace the TC, I drve mine too long like that and had to have the tranny rebuilt !
 

exbass94

Well-Known Member
Joined
Aug 6, 2007
Messages
3,340
Reaction score
39
Points
48
Age
36
Location
Guilford, CT
Vehicle Year
2006, 1994
Make / Model
Ford
Engine Size
4.0 SOHC, 4.0 OHV
Transmission
Automatic
Are you sure it's the trans? The catalytic converters are right in that area and the heat shields on them commonly rattle. It would definitely be worth at least looking into before you replace expensive tranny parts.
 

nick344

New Member
Joined
Jun 23, 2008
Messages
98
Reaction score
0
Points
0
Location
alabama
Vehicle Year
1993
Make / Model
ford
Engine Size
3.0
Transmission
Automatic
positive it is the tranny flexplate area i can make it do it by pushing up on the front of the tranny. i am going to check the spacer behind the flexplate i have been told they are bad about cracking and causing the tc to be misalined.they alum. shim that goes between the engine tranny was missing also so that would not help the misalining issue either. i also do not have a catalytic converter it has already been cut out. like i already said tranny fluid looked good just dark smells like good ol tranny fluid i am going to pull pan and check for metal shavings and replace filter. i got a new tc on the way and hopefully fixes it.
 

Explorin94

Active Member
Law Enforcement
Firefighter
EMT / Paramedic
U.S. Military - Veteran
Solid Axle Swap
Joined
Aug 7, 2007
Messages
2,243
Reaction score
19
Points
38
Age
52
Location
Farmington Il.
Vehicle Year
1988
Make / Model
Ford
Engine Size
4.0
Transmission
Automatic
If the TC was misaligned the front seal would be leaking.

Exbass...the TC's are notorious for the noise he is hearing. And is very common. What happens is the TC has an internal lock up clutch thast goues bad and flies a part.
 

nick344

New Member
Joined
Jun 23, 2008
Messages
98
Reaction score
0
Points
0
Location
alabama
Vehicle Year
1993
Make / Model
ford
Engine Size
3.0
Transmission
Automatic
my dad had a front seal leak on it and put in some lucas in it and that help out alot but did not completely fix it. i going to install tc tonight and the new flywheel i have and rear main and front pump seal and hopefully that will take care of my issue. what type of fuild do i need to use it calls for mercron 3 but i can not find that will dex/mer 5 work??
 

Explorin94

Active Member
Law Enforcement
Firefighter
EMT / Paramedic
U.S. Military - Veteran
Solid Axle Swap
Joined
Aug 7, 2007
Messages
2,243
Reaction score
19
Points
38
Age
52
Location
Farmington Il.
Vehicle Year
1988
Make / Model
Ford
Engine Size
4.0
Transmission
Automatic
The 5 is synthetic, you will be fine.
 

Sponsored Ad


Sponsored Ad

Staff online

Today's birthdays

Member & Vendor Upgrades

For a small yearly donation, you can support this forum and receive a 'Supporting Member' banner, or become a 'Supporting Vendor' and promote your products here. Click the banner to find out how.

Truck of The Month


Shran
April Truck of The Month

Recently Featured

Want to see your truck here? Share your photos and details in the forum.

Follow TRS On Instagram

TRS Events

25th Anniversary Sponsors

Check Out The TRS Store


Sponsored Ad


Sponsored Ad

Sponsored Ad


Amazon Deals

Top