How much extension?

240cubes · Nov 23, 2008

this is for anyone who has fabbed their own radius arms or who has extended the stock ones. how much should they be extended or how much longer should they be from the stock radius arms for a 4ish inch lift?

pics if you have any please

thanks

kunar · Nov 23, 2008

240cubes said:
this is for anyone who has fabbed their own radius arms or who has extended the stock ones. how much should they be extended or how much longer should they be from the stock radius arms for a 4ish inch lift?

pics if you have any please

thanks

usually any aftermarket set will be long enough to reach the trans crossmember. then the transmission crossmember is replaced with one with radius arm mounting points built in. if you are making your own, i would shoot for the same length. make your frame attachment points near the same position.

240cubes · Nov 23, 2008

im planning on making my own, or at least extending the stock ones. does that mean i need to mod my trans crossmember?

kunar · Nov 23, 2008

240cubes said:
im planning on making my own, or at least extending the stock ones. does that mean i need to mod my trans crossmember?

no, you can make stand-alone mounting brackets, probably put them just in front of the trans crossmember. lemme look for some pics.

read this thread theres lots of good pics.
also, here and here

4x4junkie · Nov 23, 2008

If you want stand-alone brackets (keeping your stock crossmember), 12" extended is the number to shoot for (check out my BII Cardomain page, there are pics of the ones I made there).

If you want to incorporate into your trans member, 15" generally works well.

How much extension?

240cubes

15+ Year Member

kunar

Forum Staff Member

240cubes

15+ Year Member

kunar

Forum Staff Member

4x4junkie

Forum Staff Member

Sponsored Ad

TRS Events & Gatherings

Latest posts

Featured Rangers

TRS Latest Video

Official TRS Merchandise

Follow TRS On Instagram

Latest Album Photos

Product Suggestions