33s

rangerrager · Nov 17, 2008

hey guys
will a 3 inch body lift and a 2 inch coil spacer in the front and add a leafs in the back be enough to fit 33s on my 2wd 93 ext cab ranger.will i have to change the gearing with the 33s.it has a 4.0 liter engine in it

#1greenranger · Nov 17, 2008

you'll be fine on gearing with the 4.0 and yes the 33's will fit great......

rangerrager · Nov 17, 2008

awsome what kind of tires can i gett 33s by 10 50s by 15 inch rim...whats the cheapest tire i can get for this thing in that size..
thanks guys
ryan

Hahnsb2 · Nov 17, 2008

I would re-gear, especially since you have an auto...

ghost_rader · Nov 17, 2008

i ran 33's on my 94 4.0l 5spd with 3.27 gears for 2 years, it was ok, but now with 3.73's it kicks $ss!! and my friend and I build a exploder w/auto trans and stock gears, and we ran 38's, but the trans was beefed up to handle towing heavy loads before we got it.

i would re-gear if your gonna use it for anything more than mall crawling.

jmo

#1greenranger · Nov 18, 2008

u could run 33 12.50's on new rims or the 10.50's on the factory rims and be good.....

BlackBII · Nov 18, 2008

ghost_rader said:
i would re-gear if your gonna use it for anything more than mall crawling.

I agree. I run 4.56 gearing with 33's.

#1greenranger · Nov 19, 2008

^^^ ya but what was ur highway gas millage?????? i get 22 on the high way with the 35's and 15 in town and only have 3.73 and my buddy has 4.10's and gets about 16-17 in town but only 17-18 on the high way with the 33's so it more depends on what your going to be driving more...............

rangerrager · Nov 20, 2008

hmm i really rather not change the gearing unless i really have too...and 1greenranger u cant really say casue u have a 2.9 liter and i have a 4 liter diffrent engine diffrent power the 4 liter will handle the 33 better the the 2.9

#1greenranger · Nov 20, 2008

ummmmm are u high???????? i have a 98 with a 4.0

rangerrager · Nov 20, 2008

hahaha..holy shit...i could have sworn it said it had a 2.9 in it for some reason..i read your profile and i thought i saw 2.9.lolol sorry dude..i must have read it wrong lol

kevinsranger · Nov 20, 2008

i had 33x12.50's on my truck with only 3" body lift with minimal rubbing but mine is 4 wheel drive. and they were on the stock rims.

rangerrager · Nov 20, 2008

hmm i think they will be ok...if they run it will give me a good excuse to trim the fenders lol
thanks guys
ryan doyle

33s

New Member

New Member

New Member

New Member

New Member

New Member

Ranger Custom

New Member

New Member

New Member

New Member

New Member

New Member

Sponsored Ad

Sponsored Ad

Member & Vendor Upgrades

Truck of The Month

Recently Featured

Follow TRS On Instagram

TRS Events

25th Anniversary Sponsors

Check Out The TRS Store

Sponsored Ad

Sponsored Ad

Sponsored Ad

Amazon Deals