LordVngr
New Member
- Joined
- Jul 5, 2008
- Messages
- 46
- Reaction score
- 0
- Points
- 0
- Vehicle Year
- 1989
- Make / Model
- Ranger
- Engine Size
- 2.9L
- Transmission
- Manual
Well I had the A/C Completely rebuilt on my 89 Ranger SC a couple of months ago. " Everything " was changed out with New parts and the system charged with 134a.
My A/C blows Cold but the amount of actual air moved by the blower motor doesnt seem very much compared to say my wifes 2000 mustang. Since I replaced both the blower motor and relay when I did the AC I have to assume it's working as designed.
I have heard that an explorer blower motor push's a lot more air at the various speed settings then the stock ranger blower motor and will fit the ranger perfectly.
Is there Any Truth to this. Has anybody done this swapout on Their Truck. I'm real interested in doing it but Only if the explorer blower motor push's a lot more air then a rangers. Thanks....
LV
My A/C blows Cold but the amount of actual air moved by the blower motor doesnt seem very much compared to say my wifes 2000 mustang. Since I replaced both the blower motor and relay when I did the AC I have to assume it's working as designed.
I have heard that an explorer blower motor push's a lot more air at the various speed settings then the stock ranger blower motor and will fit the ranger perfectly.
Is there Any Truth to this. Has anybody done this swapout on Their Truck. I'm real interested in doing it but Only if the explorer blower motor push's a lot more air then a rangers. Thanks....
LV