The Mustang (WARNING, HUGE PICS)

94STXRanger · Oct 24, 2008

Well this summer i finally started the work on my 1965 Mustang that has been sitting around since i was fifteen, Im twenty now... Anyway i tore apart a 302 thats bored sixty over, and basically just rebuilt it. I will probably add other performance parts to it later. Well here are the pics, many of them...

chain slack

Organizing parts

Bare block ready to clean and magnaflux

Clean block, new freeze plugs, all new bearings, and new 60 over pistons

Fresh heads: New seals, shimmed, valve job, decked and cleaned. Installing push rods and rockers.

Production date?

94STXRanger · Oct 24, 2008

If someone could shrink these or tell me how that would be cool. More to come in a bit

lil red · Oct 24, 2008

there not that huge
and lets see some piix of the actual car man!

COPPERHEAD85 · Oct 24, 2008

ive got some nice roller tip rockers that would look good on those heads!...

94STXRanger · Oct 25, 2008

how much?

94STXRanger · Oct 25, 2008

continued...

Water pump, wasnt sure if the studs were in the right place. Still not exactly sure.

Painted! Glass beaded valve covers, and intake. I know chrome usually looks good, but the way all of the aluminum on this motor matches, I personally think it looks awesome.

The FMX which im in the process of working on.

And finally the car. It will need paint, bad. But if i can ever get it driving i will be happy. Then ill slowly take care of the chrome and paint it. Not much to the eyes but i like it. Its got the pony interior also.

Removing everything to paint the engine bay

And just for fun, here is my project for my dad. Its a 49 Ford 8BA flathead that will someday be in a 49 F-1 thats been sitting forever.

At this point we are trying to remove the valve assemblies.

Front crossover exhaust. All of the water pump pulleys, alt, and fan would spin like they were new. the motor turns over easily. Supposedly only had 50k miles on it with no rebuilds, but a repaired crack we found says otherwise.

Its difficult to see, but it starts in the cyl. and goes up and over to the left hand valve seat. At the seat it looked like it had been welded, so we think it may be ok.

A dent..

My boat my uncle gave to me, for free.

My friends girlfriends dads mustang. And my gf standing next to it

240cubes · Oct 25, 2008

if thats a real shelby tell her to keep her mits off!

looks good so far though, what are you doing suspension wise?

my '66 was undoubtably my facorite car, really wish i'd never sold it :annoyed:

Mac · Oct 25, 2008

The casting date code is located just above the block casting number. First is a number, then a letter and two more numbers.
Both numbers located rear passenger oil pan rail, pink circle in picture.
Dave

mobileaudio219 · Oct 25, 2008

Isnt 60 over a little much for a stock block..

lil red · Oct 25, 2008

nice car man, but i would leave it the way it is and just put the hood back on, make it a sleeper

94STXRanger · Oct 25, 2008

haha a no go sleeper, yeah i think ill continue lol. Yeah sixty over is actually a lot, and if had been my motor when it was done i would have gone that far, but like i said i got the motor for free so i went with it. Ill just go easy on it. The date read E0AE, if i remember correct. I figured the 24/80 was just another form of the date but not sure. The other mustang is actually a replica, but you would be hard pressed to tell, everything down to the fender cobra tags are on there, with the cars id stamped in it. Its a beautiful car. An original roll bar, wheels, and all kinds of other stuff. 427 ci i think. Its awesome. With the suspension i think ill only be able to afford some 1" drop springs and a 1" sway bar. Ill probably get a sway bar for the rear also, and of course all new shocks. Hopefully i will be done with the engine bat soon, and be able to get the brakes done and clean and undercoat the bottom.

BLOODBANE · Oct 26, 2008

Looking good. I had a .060 over 302 block in my Ranger before I went with the 347, and never had any problems with it. And I like your choice on the alum. over the chrome

That is a pic of the 347 I have in it now(.040 over, Lunati VooDoo cam, 68 heads, topped with Pro-Jection). Keep up the good work on yours, and kep us updated.....

red85 · Oct 26, 2008

BLOODBANE said:
And I like your choice on the alum. over the chrome
QUOTE]

Me too!

Ozwynn · Oct 26, 2008

good looking mustang (I mean straight and no rust) I want a reproduction 68 fastback so i can retrofit all 2008 saleen stuff into it. right down to the interior and the airbags. wont be long until there is a few wrecked Saleens in the junk yards

AngryLepercon · Oct 26, 2008

Love the 302. When my 4.0 goes up a 302 will be shoved in. Nice work.

The Mustang (WARNING, HUGE PICS)

94STXRanger

15+ Year Member

94STXRanger

15+ Year Member

lil red

15+ Year Member

COPPERHEAD85

15+ Year Member

94STXRanger

15+ Year Member

94STXRanger

15+ Year Member

240cubes

15+ Year Member

Mac

15+ Year Member

mobileaudio219

15+ Year Member

lil red

15+ Year Member

94STXRanger

15+ Year Member

BLOODBANE

15+ Year Member

red85

15+ Year Member

Ozwynn

If you didn’t bleed for it you don’t deserve it

AngryLepercon

15+ Year Member

Sponsored Ad

TRS Events & Gatherings

Latest posts

Featured Rangers

TRS Latest Video

Official TRS Merchandise

Follow TRS On Instagram

Latest Album Photos

Product Suggestions