PDA

View Full Version : 89 Ranger manual t case and auto hubs


dieselranger
09-22-2007, 08:28 PM
Can I use a manual t case with auto hubs on my dana 28? If not can i swap to manual hubs from an earlier truck?

MAKG
09-22-2007, 08:33 PM
Yes and yes. Any earlier RBV that has 4WD has a Dana 28.

projectnitemare
09-24-2007, 07:47 AM
If you decide to swap to manual hubs you need the spindle nuts and lock washer too or the hubs won't fit.

Matt

TheChuckster396
10-06-2007, 10:27 AM
DANGER! Yes, you can do this swap BUT. . . you must stop your truck completely before engaging the 4x4 - you can't shift "on-the-fly" with auto hubs and a manual transfer case - I'm not sure the reason, but that was the problem I had. I found out the hard way - the hubs won't engage completely if the truck is rolling. That was my experience anyway. Good luck!