starter bolts and bell housing bolts????

[Chingadera]

I am trying to save a bronco II that was used as a parts truck for a while. I put a new motor in it and have replaced a ton of other stuff. Now I have a problem. I need bell housing bolts and starter bolts? I think the bell bolts are M10X1.50 but I don't have a clue on what bolts hold the starter on or how long they are. If someone could help me out with this info I would greatly appreciate it. It about the last thing I need to finish the project. The motor only had 2 bolts (not the right ones) in it and the starter was missing as was the bolts. I didn't loose them. I simply never had them.

Sizes and lengths?????

[dirtsquirt]

Any ford dealer should be able to tell you, If they are worth there nuts and bolts, call a dealer they can pull it up on a micro film reader

[Chingadera]

Any ford dealer should be able to tell you, If they are worth there nuts and bolts, call a dealer they can pull it up on a micro film reader

Already did thats how I got the m10X1.50 but they had nothing on the starter.???

[dirtsquirt]

well if i get off work early enough i will pull a starter bolt for u
and get the size

[Chingadera]

If I new the size that would be a massive help.