- Joined
- Jun 22, 2008
- Messages
- 21
- Points
- 3,101
- City
- Knoxville TN
- Vehicle Year
- 1990
- Transmission
- Automatic
I have a 90 2WD with the stock setup. I have replaced the coil springs new stock replacements, shocks, rotors and wheel bearings, new tires, rims appeared to be in good shape. I had a front-end shop do an alignment, he was able to adjust the driver side camber correctly, but the passenger side needs a bushing to correct it. The steering and suspension parts all seem to be in good shape, according to the alignment shop. Will the camber being off a little on one side cause vibration in the front end?
