- Joined
- Sep 6, 2008
- Messages
- 10
- Points
- 3,101
- Age
- 46
- City
- long island
- Vehicle Year
- 98
- Transmission
- Automatic
my fuse on side of my dash has popped a few times recently. (fuse 27) tranny seems to be working fine but cant select to shut o/d off until i replace the fuse. if i change the fuse while its running it seems to work fine. i did that then parked it for the night and it was blown again the next day.
yesterday i was playing around with it and i took the steering column apart to look for a fray in the wire going to the button but didnt see anything.
i put a fuse back in and started it up and shut it off a few times and it seems to work. when the fuse is blown the tranny works fine i just cant shift out of o/d until i replace the fuse. could their be a simple solution.
any advise would be greatly appreciated.
and by the way, the thread about the blend door fix was great. i had that problem and wasnt about to get into paying someone to pull it apart. i was just gonna deal with hot and cold but that was a great fix. thank you guys for this site.
yesterday i was playing around with it and i took the steering column apart to look for a fray in the wire going to the button but didnt see anything.
i put a fuse back in and started it up and shut it off a few times and it seems to work. when the fuse is blown the tranny works fine i just cant shift out of o/d until i replace the fuse. could their be a simple solution.
any advise would be greatly appreciated.
and by the way, the thread about the blend door fix was great. i had that problem and wasnt about to get into paying someone to pull it apart. i was just gonna deal with hot and cold but that was a great fix. thank you guys for this site.
