- Joined
- Aug 18, 2007
- Messages
- 195
- Points
- 3,101
- Age
- 42
- City
- Richmond twp, mi
- Vehicle Year
- 2001
- Transmission
- Manual
I have a1993 ranger 3.0 4x4, what shhifter assemlies will fit it?
trans interchansbilty question
- Thread starter booblinker
- Start date
- Joined
- Aug 18, 2007
- Messages
- 195
- Points
- 3,101
- Age
- 42
- City
- Richmond twp, mi
- Vehicle Year
- 2001
- Transmission
- Manual
As in the top of the trans with the shift forks and that whole assembly on the top of the trans.
- Joined
- Sep 4, 2007
- Messages
- 3,814
- Points
- 3,101
- Age
- 38
- Vehicle Year
- 1997, 1994
- Transmission
- Manual
All M5OD-R1 top sections will fit. You can get one from any 90+ RBV with a manual tranny.
- Joined
- Jun 1, 2001
- Messages
- 7,897
- Points
- 5,101
- Age
- 64
- Vehicle Year
- 1987... sorta
- Transmission
- Manual
The 1994-on top covers have a slightly taller shift tower with a somewhat
longer "finger" (stub lever) and thus while the top cover as an ASSEMBLY will fit, you cannot change the stub lever from one to the other.
the "main" shift lever is the same from 88-97.
In 1998 the stub lever is keyed differently to work with a revised main shift lever that mounts differently (and places the shift knob more than an inch further to the rear)
AD
longer "finger" (stub lever) and thus while the top cover as an ASSEMBLY will fit, you cannot change the stub lever from one to the other.
the "main" shift lever is the same from 88-97.
In 1998 the stub lever is keyed differently to work with a revised main shift lever that mounts differently (and places the shift knob more than an inch further to the rear)
AD
Sponsored Ad
TRS Events & Gatherings
Featured Rangers
TRS Latest Video
Official TRS Merchandise
Follow TRS On Instagram
