92 Ranger Bed
- Thread starter poplbyit
- Start date
lil_Blue_Ford
Cut & Weld
TRS Forum Moderator
⭐Supporting Member
TRS Event Participant
TRS 20th Anniversary
TRS 25th Anniversary
V8 Engine Swap
- Joined
- Aug 6, 2007
- Messages
- 13,071
- Points
- 3,101
- City
- Butler
- State - Country
- PA - USA
- Vehicle Year
- 2000
- Vehicle
- Ford Ranger
- Engine
- 5.0
- Transmission
- Automatic
- Total Drop
- 4”
Remove 3 small bolts around the gas filler (open the filler "door" and take 'em out).
Unplug electrical connectors for the taillights (or remove the taillights).
Remove 6 bed bolts, T-55 Torx IIRC. Depending on how rust is where you live they may or may not come out easily. I snapped 2-3 of mine on an 89 using a breaker bar and 3' cheater pipe. The rest came out after much work and lots of penetrating oil (crawl under the truck an soak 'em down for a day or two before you get started if possible).
Lift off.
Unplug electrical connectors for the taillights (or remove the taillights).
Remove 6 bed bolts, T-55 Torx IIRC. Depending on how rust is where you live they may or may not come out easily. I snapped 2-3 of mine on an 89 using a breaker bar and 3' cheater pipe. The rest came out after much work and lots of penetrating oil (crawl under the truck an soak 'em down for a day or two before you get started if possible).
Lift off.
- Joined
- Sep 1, 2008
- Messages
- 4
- Points
- 3,001
- Vehicle Year
- 1992
- Transmission
- Automatic
THANK YOU poplbyit
Sponsored Ad
TRS Events & Gatherings
Featured Rangers
TRS Latest Video
Official TRS Merchandise
Follow TRS On Instagram
