one of my bolt broke


MikeyFord3

15+ Year Member

Joined
Jun 6, 2008
Messages
260
Points
3,101
Age
35
City
Greenwich, NJ
Vehicle Year
2012
Transmission
Automatic
can anyone tell me where or how i can replace it

its the bolt for a 95 ranger front disc break it holds the pads on the tight to the rotor
 
You can buy the bolt at the parts store. Is it a caliper bolt or a bracket bolt? if it is a caliper bolt you can get a whole new bracket at the parts store. They may have to order it though. Otherwise you could take the bracket into a repair shop, machine shop or fab shop and they can fix it for you.
I'm not sure if that uses a removable bracket though, I work on to many different things to remember.
 
You should be able to remove the knuckle and drill it and use a bolt extractor to get it out after letting it sit with some PBblaster. Heat would help too.
 
The bolts that hold the caliper and pads together to the rotor are known as caliper slide pins/bolts. The other bolts are the caliper mounting bracket bolts that mount to the steering knuckle.
The slide pins are usually about 5 bucks for the set for both sides.
The caliper mounting bracket bolts usually have to be matched up from an old one for thread pitch and length as most parts stores wont know from looking it up in the computer.
 
You must log in or register to reply here.

Sponsored Ad

TRS Events & Gatherings

Where We Were in 2025 – The Ranger Station

Latest posts

Featured Rangers

Want to see your truck here? Share your photos and details in the forum.

TRS Latest Video

Official TRS Merchandise

Follow TRS On Instagram

Latest Album Photos

IMG_4690.JPEG
IMG_4689.JPEG
IMG_4688.JPEG
IMG_4679.JPEG
IMG_4656.JPEG
IMG_4625.JPEG
IMG_4562.JPEG
IMG_4561.JPEG
IMG_4560.JPEG
IMG_4559.JPEG
IMG_4558.JPEG
IMG_4445.JPEG

Product Suggestions

Back
Top