- Joined
- Oct 14, 2007
- Messages
- 1,062
- Points
- 3,101
- City
- Dirty Jersey
- Vehicle Year
- 94
- Transmission
- Manual
i just got a set of springs out of a 2 door explorer, free,
i belive its the 4 spring style
and iv heard on the tech form that you can get a little lift out of explorer leafs.
and i want to eliminate the STACKED BLOCKS in the rear
ok so heres the ?
should i just go with the springs as is(already flipped the pin, gotta love vice grips and a snapon impact gun!!!)
should i take them apart and weave in leafs from my stock springs
almost forgot
its an 85 ranger
4x4 4 inch skyjacker lift
o and i have the stock block and the skyjacker block
which should i keep in, and is there a way to get about 3" of lift so i dont sag too badly with my quad, motorcycle, trailor on or in the back?
i belive its the 4 spring style
and iv heard on the tech form that you can get a little lift out of explorer leafs.
and i want to eliminate the STACKED BLOCKS in the rear
ok so heres the ?
should i just go with the springs as is(already flipped the pin, gotta love vice grips and a snapon impact gun!!!)
should i take them apart and weave in leafs from my stock springs
almost forgot
its an 85 ranger
4x4 4 inch skyjacker lift
o and i have the stock block and the skyjacker block
which should i keep in, and is there a way to get about 3" of lift so i dont sag too badly with my quad, motorcycle, trailor on or in the back?
