Well it’s been a long time and I have finally found my new rig…
1990 Eddie Bauer Edition
Rough Country 4” lift and 2” coil spacers
Lifted GM Shackles for the rear (not yet installed)
32/11.50 on stock rims
Cut Fenders
CB radio
Custom Length Rear Drive Shaft
Stock 2.9
Auto Hubs
Still trying to figure out if it has the Dana 35 up front (ID tag missing)
Future possible mods include…Warn Manual hubs, Manual floor shift T-case, 8.8 Rear axle, lower gearing, Pace Performance Flex Flares, Steel Rims, Full size spare, and what ever I feel like needs to be done in order to be satisfied with the power from the motor.
I went thought the tech Library and the posts under the Axle section of the forum and am still having a hard time on figuring out if the front axle is a Dana 35 or not and what gears are in both axles.
If any one can lend some more help on how to identify my axles and gearing. I would appreciate and could use the help.
1990 Eddie Bauer Edition
Rough Country 4” lift and 2” coil spacers
Lifted GM Shackles for the rear (not yet installed)
32/11.50 on stock rims
Cut Fenders
CB radio
Custom Length Rear Drive Shaft
Stock 2.9
Auto Hubs
Still trying to figure out if it has the Dana 35 up front (ID tag missing)
Future possible mods include…Warn Manual hubs, Manual floor shift T-case, 8.8 Rear axle, lower gearing, Pace Performance Flex Flares, Steel Rims, Full size spare, and what ever I feel like needs to be done in order to be satisfied with the power from the motor.
I went thought the tech Library and the posts under the Axle section of the forum and am still having a hard time on figuring out if the front axle is a Dana 35 or not and what gears are in both axles.
If any one can lend some more help on how to identify my axles and gearing. I would appreciate and could use the help.
