Cobra Brake Swap


00RangerXLT

10+ Year Member

Joined
Feb 2, 2008
Messages
7
Points
3,001
Age
35
City
Muskegon, Michigan
Vehicle Year
2000
Transmission
Automatic
I am going to get lightning rims this summer. I want to get different brakes so I want to do a cobra brake swap on my Ranger. This is possible??? thanks
 
yes it is actually pretty simple to do, but not cheap. send an email to info@nekustoms.com to get the kit for the front. you have to supply you own rotors and calipers. the kit from nekustoms is $365, its new hubs and caliper brackets. to mount it its just like a brake job, you pack the bearings and install the hub, the caliper attaches to the the bracket and you bolt it on. to mate the line to the caliper you have to drill it out to 7/16s for the banjo bolt to fit and bend it a little.

For the rear you can get a bracket from fortes motor sport or north race cars. it replaces your drum backing plate and bolts right in. for the brake line in the rear you have to bend the stock line to run next to the outside of the leaf spring and it bolts directly to the cobra soft line, then you bolt it right to the caliper. ( note this is for 7.5 or 28spline 8.8 only in the rear)
Cobra Brake Swap
Cobra Brake Swap
 
You must log in or register to reply here.

Sponsored Ad

TRS Events & Gatherings

Where We Were in 2025 – The Ranger Station

Latest posts

Featured Rangers

Want to see your truck here? Share your photos and details in the forum.

TRS Latest Video

Official TRS Merchandise

Follow TRS On Instagram

Latest Album Photos

IMG_4690.JPEG
IMG_4689.JPEG
IMG_4688.JPEG
IMG_4679.JPEG
IMG_4656.JPEG
IMG_4625.JPEG
IMG_4562.JPEG
IMG_4561.JPEG
IMG_4560.JPEG
IMG_4559.JPEG
IMG_4558.JPEG
IMG_4445.JPEG

Product Suggestions

Back
Top