Welcome Visitor! Please take a few seconds and 
- Joined
- Dec 1, 2007
- Messages
- 86
- Reaction score
- 0
- Points
- 0
- Age
- 39
- Location
- Prince George
- Vehicle Year
- 1989
- Make / Model
- Ford
- Transmission
- Manual
I am looking to get new axles for my 9" since one is bent and the splines on both are twisted.
Here is my dilemma. I don't know what axle I need (i.e. big bearing/ small bearing etc.)
Here's what I have:
28 spline axles
Bearing diameter over 3" (leads me to believe it is a big bearing)
Axle seal that goes on the inside of the bearing not the outside (pic below)
The seal is what confuses me since I thought that the big bearing axles had seals that went on the outside of the axle like this:
If the big bearing was also used in combination with the first seal please let me know. This one has me stumped.
Any help is much appreciated.
Here is my dilemma. I don't know what axle I need (i.e. big bearing/ small bearing etc.)
Here's what I have:
28 spline axles
Bearing diameter over 3" (leads me to believe it is a big bearing)
Axle seal that goes on the inside of the bearing not the outside (pic below)
The seal is what confuses me since I thought that the big bearing axles had seals that went on the outside of the axle like this:
If the big bearing was also used in combination with the first seal please let me know. This one has me stumped.
Any help is much appreciated.
