Cross pin diameter?

metalmacguyver · May 25, 2008

This seems like a stupid question but it there any way to tell what size crosspin a 8.8 has with out pulling the cover?

Also, what axles (applications, and vehicle models, only talking about 8.8s here) had which crosspins? I dont think it would be random so what were the determining factors?

Hahnsb2 · May 25, 2008

Should be 7/8". Only early 8.8s (mid-ish 80s?) had the 3/4" pin I believe.

mkpecor · May 25, 2008

Sasquatch_Ryda · May 25, 2008

My 91 ranger 8.8 had the 3/4" crosspin, my 92 explorer 8.8 has a 7/8" crosspin

Evan · May 25, 2008

AFAIK:

Pre-1987 8.8s all have the 3/4" crosspin. 28 spline 8.8s use the 3/4" crosspin. All 8.8s that are 31 spline and made after 87 have a 7/8" crosspin.

mkpecor · May 25, 2008

Hahnsb2 · May 25, 2008

Evan said:
AFAIK:
28 spline 8.8s use the 3/4" crosspin.

I'll remember that, I was thinkin all later 8.8s had the 7/8s...

metalmacguyver · May 25, 2008

So all exploder axles have the 7/8 pin. And all 28 spline 8.8s have the 3/4 pin. This is good because I found this. http://cgi.ebay.com/ebaymotors/Powe...009QQitemZ190224037632QQrdZ1QQsspagenameZWDVW

4x4junkie · May 28, 2008

Evan said:
AFAIK:

Pre-1987 8.8s all have the 3/4" crosspin. 28 spline 8.8s use the 3/4" crosspin. All 8.8s that are 31 spline and made after 87 have a 7/8" crosspin.

Yep.

metalmacguyver · May 28, 2008

Yup. AllenD set me straight on that too.

Cross pin diameter?

metalmacguyver

Yeah, I built that.

Hahnsb2

15+ Year Member

mkpecor

15+ Year Member

Sasquatch_Ryda

TRS Staff - Retired

Evan

15+ Year Member

mkpecor

15+ Year Member

Hahnsb2

15+ Year Member

metalmacguyver

Yeah, I built that.

4x4junkie

Forum Staff Member

metalmacguyver

Yeah, I built that.

Sponsored Ad

TRS Events & Gatherings

Latest posts

Featured Rangers

TRS Latest Video

Official TRS Merchandise

Follow TRS On Instagram

Latest Album Photos

Product Suggestions