2nd is messed up in A4LD

texasredneck · Apr 27, 2008

ok so my A4LD i though was shot. but i read Glacier991's thread from one of the exploders forums and changed out my modulator. Well I now have 2nd gear but only manually if its in od or drive it does not shift up. I was wonering if this sounds like a gov. or a shift silenoid? or even a band adjustment. when i shift it manually 2nd gear is strong so i dont think its a band but it maybe.. Thanks in advance.

PS its a 89 broncoII with A4ld and 1354 manual from and exploder.

Bruce · Apr 27, 2008

Sounds like governor...But .check vacuum line to modulator to make sure its hooked up and not disconnected on either end and also check to make sure there is vacumm on the line at the mod.

texasredneck · Apr 27, 2008

well i put a new one on today but i'll check out the line later thank you. Oh and i'll check the gov .

2manyfords · Apr 28, 2008

There is a small rod that fits in the modulator, you didn't loose it did you?
If it's missing the tranny will think you are at WOT and shift accordingly.

F150hybred · Apr 28, 2008

2manyfords said:
There is a small rod that fits in the modulator, you didn't loose it did you?
If it's missing the tranny will think you are at WOT and shift accordingly.

That makes sence... in a strange way.

texasredneck · Apr 28, 2008

no I made sure to reinstall that little pin. :icon_thumby:

2nd is messed up in A4LD

texasredneck

15+ Year Member

Bruce

15+ Year Member

texasredneck

15+ Year Member

2manyfords

15+ Year Member

F150hybred

15+ Year Member

texasredneck

15+ Year Member

Sponsored Ad

TRS Events & Gatherings

Latest posts

Featured Rangers

TRS Latest Video

Official TRS Merchandise

Follow TRS On Instagram

Latest Album Photos

Product Suggestions