- Joined
- Oct 19, 2007
- Messages
- 473
- Points
- 3,101
- Age
- 38
- City
- Lowell, IN
- Vehicle Year
- 2006/1986/2001
- Transmission
- Automatic
I was wondering if a set on 32x10.50s would fit a stock 06 FX4 without rubbing?
32x10.50R15s
- Thread starter Danger06Ranger
- Start date
- Joined
- Oct 6, 2007
- Messages
- 3,301
- Points
- 3,101
- Age
- 40
- Vehicle Year
- 1987
- Transmission
- Manual
first off, what size rims are on the truck factory, that will give us some more info, and what size tires are u running now, what are the clearances with those tires, what is the backspacing on the new rims, how wide are the new rims, do u have enough chearance with the caliper to run a 15" wheel.
need alot more info to tell u what would work, in ideal situation it would fit but rub a bit while flexing and hard turns
need alot more info to tell u what would work, in ideal situation it would fit but rub a bit while flexing and hard turns
- Joined
- Aug 16, 2007
- Messages
- 446
- Points
- 3,101
- Age
- 45
- City
- Poconos, Pa
- Vehicle Year
- 1989
- Transmission
- Manual
you probablly have the stock 16x7 inch wheels? If so a 265 x 75 r 16 will be a 32 x 10.5, and should fit. I put them on my brother in laws truck and i think we could have squeezed 285s on htere no problem
- Joined
- Oct 19, 2007
- Messages
- 473
- Points
- 3,101
- Age
- 38
- City
- Lowell, IN
- Vehicle Year
- 2006/1986/2001
- Transmission
- Automatic
sorry, I was in a rush earlier. I'll be installing the on my 06 FX4, 4.0L SOHC auto, on the stock Alcoa polished aluminum 15x7s, right now I have the stock 31x10.50R15 BFG All-Terrains.
- Joined
- Aug 7, 2007
- Messages
- 1,879
- Points
- 3,101
- City
- Costa Mesa, CA
- State - Country
- CA - USA
- Other
- 2004 Bronco Badlands
- Vehicle Year
- 2002
- Vehicle
- Ford Ranger
- Drive
- 4WD
- Engine
- 4.0 V6
- Transmission
- Manual
- Total Lift
- 1.5"
- Tire Size
- 33"
I don't think anyone makes a 32x10.5-15 tire. I have 32x11.5-15 tires and they fit just fine. I do have the front lifted about 1.5" with a torsion bar crank.
The ProComp 32" tires have little narrower body than other brand 32" tires but other brands should work too.
The ProComp 32" tires have little narrower body than other brand 32" tires but other brands should work too.
Last edited:
- Joined
- Aug 16, 2007
- Messages
- 446
- Points
- 3,101
- Age
- 45
- City
- Poconos, Pa
- Vehicle Year
- 1989
- Transmission
- Manual
If you have 15s, see if the tire shop will let u test fit a 32x11.5 in the front, and turn the wheel back adn forth to make sure it doesnt rub. Maybe flex it on a curb or something in the parking lot too. With the t bar crank it should fit, but its best to make sure.
- Joined
- Oct 19, 2007
- Messages
- 473
- Points
- 3,101
- Age
- 38
- City
- Lowell, IN
- Vehicle Year
- 2006/1986/2001
- Transmission
- Automatic
These are them right here.
http://store.summitracing.com/partd...400869+4294905061+4294813900+115&autoview=sku
http://store.summitracing.com/partd...400869+4294905061+4294813900+115&autoview=sku
- Joined
- Aug 7, 2007
- Messages
- 1,879
- Points
- 3,101
- City
- Costa Mesa, CA
- State - Country
- CA - USA
- Other
- 2004 Bronco Badlands
- Vehicle Year
- 2002
- Vehicle
- Ford Ranger
- Drive
- 4WD
- Engine
- 4.0 V6
- Transmission
- Manual
- Total Lift
- 1.5"
- Tire Size
- 33"
They should fit. Mine are 10.9" wide and 31.4" in diameter. The ones you are looking at are a little narrower and a little taller at 10.5" and 32.1".
- Joined
- Oct 19, 2007
- Messages
- 473
- Points
- 3,101
- Age
- 38
- City
- Lowell, IN
- Vehicle Year
- 2006/1986/2001
- Transmission
- Automatic
Cool, thanks for the input. Its gunna have to wait till I get my tax check back, but Ill get them, and some pictures too.
Sponsored Ad
TRS Events & Gatherings
Latest posts
-
-
-
-
-
-
Aftermarket trailer hitch refinishing question- Latest: 85_Ranger4x4
-
-
-
-
Featured Rangers
TRS Latest Video
Official TRS Merchandise
Follow TRS On Instagram
