- Joined
- Aug 8, 2007
- Messages
- 59
- Points
- 3,101
- City
- Allendale, MI
- Vehicle Year
- 1988
- Transmission
- Manual
Help,
yes I know this has been asked before and have found most just say to change the sending unit and check the float....
Anyway, I have a 87' ranger and the gas gage has never worked since I bought the truck.
Mine is at empty when the truck's off and at this point in time reads 3/8 of a tank when the truck's running (before has read empty while running).
I just replaced the sending unit and pump in the tank and that didn't fix it.
Isn't the float part of the sending unit?
I've checked all the wires from the tank to the dash and found no issues.
Are there other grounds besides at the tank?
At this time, I have nothing to check the voltage except the old poke and light screw driver.
???????????
Thanks.d9n
yes I know this has been asked before and have found most just say to change the sending unit and check the float....
Anyway, I have a 87' ranger and the gas gage has never worked since I bought the truck.
Mine is at empty when the truck's off and at this point in time reads 3/8 of a tank when the truck's running (before has read empty while running).
I just replaced the sending unit and pump in the tank and that didn't fix it.
Isn't the float part of the sending unit?
I've checked all the wires from the tank to the dash and found no issues.
Are there other grounds besides at the tank?
At this time, I have nothing to check the voltage except the old poke and light screw driver.
???????????
Thanks.d9n
