- Joined
- Apr 8, 2008
- Messages
- 251
- Points
- 3,101
- Vehicle Year
- 2002
- Engine
- 4.0 V6
- Transmission
- Automatic
Awhile ago, I did an add-a-leaf on my '92 2wd. That raised the rear, from where it was, about 4". It is supposed to be a 2" lift over stock in the rear. The truck has 220k+ miles on it, and I think the front springs are sagging from wear. I'd like to replace them, but I'm not sure if I need stock size, or a slight lift to bring the truck back to level. It has a pretty hefty rake to it now.
So, where do I find springs for this truck, and is stock height, or 2" or so lift in the front appropriate? I also need to replace the struts, as they are feeling very worn out(rear end will slam down over speed bumps).
I'd post in the 2wd forum, but most threads seem to be about lowering, rather than raising.
So, where do I find springs for this truck, and is stock height, or 2" or so lift in the front appropriate? I also need to replace the struts, as they are feeling very worn out(rear end will slam down over speed bumps).
I'd post in the 2wd forum, but most threads seem to be about lowering, rather than raising.
