- Joined
- Feb 20, 2008
- Messages
- 11
- Points
- 3,101
- City
- Coos Bay, OR.
- Vehicle Year
- 1984
- Transmission
- Automatic
I bought a set of James Duff header for my 302 powered Bronco II a couple of years ago, when they first came out with the ceramic coated ones. I finally got around to pulling my motor to do a little work on it. Turned out the center crank bearing was completely shot and had ruined the crank and block.
Now I have a new motor.
Anyway back to the headers, I have bad exhaust leaks on both sides near the back, when I first put them on I use some soft copper gaskets, I already pulled the starter side off and put in the white asbestos type that Duff sent with the headers. Still have bad leaks, does anybody have any suggestions?
Now I have a new motor. Anyway back to the headers, I have bad exhaust leaks on both sides near the back, when I first put them on I use some soft copper gaskets, I already pulled the starter side off and put in the white asbestos type that Duff sent with the headers. Still have bad leaks, does anybody have any suggestions?
Last edited:
