DD 94 extended cab toy

Xeek · Sep 13, 2012

1994 extended cab, 2wd, 3.08 gears

( !!!!!!), power windows/locks/mirrors, tilt and cruise control, stock 16" wheels from newer rangers with stock tires, grey interior, brand new headlights, brand new radiator, new water pump.
this will be my dd, but i would like to just make it a little nicer.

EXTERIOR
depo clear corners with amber bulbs
custom dent and paint on passenger side
5th gen? ranger stock alloy 16" wheels with 235/65R16 tires.

INTERIOR
grey suede headliner
2nd gen exploder grey OHC
1st gen exploder lighted vanity double visors
custom broken armrest bench seat

MOTOR
stock 4.0l and a4ld at 180k for now

SUSPENSION
stock for now. 3.08 open

FOR THE FUTURE:
paint work for fading and from the ex-cab dent.
3"/4" drop
newer badges from like the 05-08 years(not sure, but its 05-08 for superdutys).
steal the 2nd gen exploder 8.8 out of my exploder trail truck. 3.73s, discs, aussie locker. add v8 exploder ladder bars also

as i got it...

Xeek · Sep 13, 2012

7.18.12:
i cleaned the carpet the other day. i didnt get an after pic, but the whole carpet looks as grey as the ring around the tranny hump hole. besides a few sun fades and rust color around a few of the seat bolt holes

this was before:

cleaned:

7.21.12:
clear corners are done. they even sent me amber bulbs with the lights

8.15.12:
double visors

headliner

ohc

9.1.12:
replacing my filler neck today. its got common cracking on the rubber. i love having a crane, i even used it to pick up the tool box without taking everything out lol

here you can see the dryrot cracks in it. so when its filled up it leaks out like 10oz of gas. and why i smell gas while driving prob cause it sloshes out and leaks. no more leaking or gas smell now

Xeek · Sep 16, 2012

no one likes my truck?

lol

well i found a 94 4dr exploder at the junkyard today with the same seats my ranger has. except buckets. so i grabbed the drivers seat and swapped the tracks. note swapping tracks is not necessary between the two trucks, BUT, the tracks were broken on the exploder so i kinda had it. but it wouldve bolted in otherwise.

now the question is: full length 2nd gen exploder console. or short 1st gen exploder console, leaving me with 4 cup holders? lol

JoshT · Sep 16, 2012

I say go with the full length. IIRC it'll still have 4 cup holders, the other two will be in the in the back of the console and fold down when needed.

Xeek · Sep 30, 2012

9.30.12

finally got the ohc and the visors working

TheTwanksta · Oct 8, 2012

Good job! Now find some LEDS to put in those visors!

Xeek · Oct 8, 2012

im working on it. haha. i already put leds in the stock dome light and ohc. the ones in the ohc im not happy with, they have a single aimed sideways led. im gonna try some led boards hot glued in there next time

10.3.12
360* 194 and 9 led directional 39mm festoon in the dome light. 3175 festoon in the ohc. all 'cool white'

this was taken with a real camera, so its a little better

10.7.12
painted some trim. still need to do the bumper valance. and mothers back-to-black on my window rubber

F8LBITE · Oct 8, 2012

Looking great! Keep up the nice work!

multiranger · Oct 8, 2012

Good start on building a nice street truck!

Xeek · Oct 9, 2012

thanks guys!

10.9.12
i had to replace my battery and the terminals. battery started going flaky saturday, fluctuating voltmeter and had to be jumped. drove fine until monday going to lunch. died at walmart. refused to be jumped, went home and stole my other trucks battery(it dont need it atm anyway) and it started right up!
but the terminals were all screwy. pos side was corroded to hell. neg side looked fine until i spliced on a new terminal.. plug the terminal was buggered up and the nut froze and broke off so it was forever loose.
so now all clean and prudy. should take care of my problems

Kingoverace · Oct 10, 2012

Start lowering it :headbang:

Good cleanup though...I know ya just got it. But its coming along great!

TheTwanksta · Oct 11, 2012

Out of curiosity, how do you attach the OHC to the Ranger headliner?

RangerSVT · Oct 11, 2012

The ohc bolts to a bracket, and the bracket bolts to the roof support ridge. Truck looks good so far...

SVT

Xeek · Oct 12, 2012

kingoverance, in good time i will. between my exploder and rebuilding the 4.0 in it itll be a slow process. but im open to suggestions on how to atleast level the rear to match the front when i put in the disc 8.8soon.

twanksta, as rangersvt said theres a bracket. i pushed the ohc against the headliner to make an outiline. then cut the hole as needed to mount it.
after i took the headliner out and mounted the bracket:

Xeek · Nov 12, 2012

'99 exploder 8.8. aussie locker. 3.73s. SUA with exploder 4 leaf springs. '95 non-abs&non-proportioning master cylinder.

DD 94 extended cab toy

New Member

New Member

New Member

Well-Known Member

New Member

09/12 07/13 STOTM

New Member

New Member

Praise the Lowerd!

New Member

Member

09/12 07/13 STOTM

Oct 09 OTOTM

New Member

New Member

Sponsored Ad

Sponsored Ad

Member & Vendor Upgrades

Truck of The Month

Recently Featured

Follow TRS On Instagram

TRS Events

25th Anniversary Sponsors

Check Out The TRS Store

Sponsored Ad

Sponsored Ad

Sponsored Ad

Amazon Deals