- Joined
- Dec 31, 2007
- Messages
- 12
- Points
- 3,101
- City
- west side cincy
- Vehicle Year
- 1992
- Transmission
- Manual
I have a 92 2wd Ranger with an 7.5" open differential 3.45 ratio. (code 84 on the chart)
Unless there's a better option, I was going to look for an F4 or F6 rear axle and diff, both are the limited slip, F4 is a 3.45, F6 is 3.73.
I'm new to trucks, is this pretty much a direct swap? I had a 300zx VLSD with J30 axles in my old 240sx, but I've never worked with solid rear axles or differentials before. Thanks for any help!
Unless there's a better option, I was going to look for an F4 or F6 rear axle and diff, both are the limited slip, F4 is a 3.45, F6 is 3.73.
I'm new to trucks, is this pretty much a direct swap? I had a 300zx VLSD with J30 axles in my old 240sx, but I've never worked with solid rear axles or differentials before. Thanks for any help!
