auto hubs??? junk?


bert296

10+ Year Member

Joined
Nov 21, 2011
Messages
129
Points
1,601
City
UP MAINE
Vehicle Year
1993
Transmission
Manual
hi i've read all the stuff in the tech library about these auto hubs and tried fixing them just to get me by till i buy a set of manual hubs. what goes wrong in these auto hubs that makes them not work? i cleaned the gease and all kinds of crud out of them the spring seams move freely tried putting hot ATF in it and let it sit and worked the internals around while it was filled with ATF and still nothing... only 2by go any help would be great thanks
 
Mine would only engage if I was going 15 mph, which pretty much makes them useless in my opinion. Maybe try going at least 15 mph if you haven't already.
 
ya i tried that they dont even work with the truck on jack stands
 
The plastic cams that actuate the hubs have little tits on the top and they get broken off.
 
Manual hubs are the better way to go but a buddy of mine had the same problem with the autos. he said he greased the sh** out of them and they where fine. Also you could try going into rev when u lock them in. back up a few feet then go forward best way to lock in a 4wd ( or so the local 4x4 shop owner informed me lol )
 
just wondering if the transfer case is engaging...........and I think there is a way of locking them all the time. this basically turns them into the live axle that the 2001? + have
 
I seem to recall a thread that shows how to drill a hole and make auto into pushbutton.

Richard
 

Sponsored Ad

TRS Events & Gatherings

Latest posts

Featured Rangers

Want to see your truck here? Share your photos and details in the forum.

TRS Latest Video

Official TRS Merchandise

Follow TRS On Instagram


Product Suggestions

Back
Top