2 inch lift!


1988dangerranger

1988dangerranger

10+ Year Member

Joined
Nov 21, 2010
Messages
122
Points
1,601
Age
32
City
Loveland CO
Vehicle Year
1988, 1987
Transmission
Manual
So I bought my 2 inch and its here.. and going on on sunday. Coil spacers in front and actually a 3 inch block in the back(fix the sag). I was wondering if im going to have an issue with my pinion angle or pitman arm(or anything else for that matter). Advice appreciated! Thanks.
 
No need for a new pitman arm it will be fine as should be your pinion angle you dont need to worry about it the blocks should have a little bit of a angle to them to fix you pinion angle.
 
You will need an alignment to get your camber back to normal.

Sent from my LS670 using Tapatalk
 
Get a set of concentrix to adjust your alignment. Install them before you take it to get aligned or the shop will rape your wallet for you.

Sent from the road while ignoring traffic
 
Yeah I was absolutely planning on getting it aligned! Thanks for the advice guys!
 
Get 3 degree adj. camber bushings. Stempf part number is EX-3
 
1988dangerranger said:
So I bought my 2 inch and its here.. and going on on sunday. Coil spacers in front and actually a 3 inch block in the back(fix the sag). I was wondering if im going to have an issue with my pinion angle or pitman arm(or anything else for that matter). Advice appreciated! Thanks.
Click to expand...

Post some pics when you get it done, Bro!!!
 
Ok so I ordered 3deg. adjustable camber bushings for the alignment because brakes plus was trying to F*CK me with a 310 ticket for aligning! So Im using 3deg. bushings. will those work?!
 
3 degrees maxed out should be about perfect. You will also have to fix your toe.

Have a standard alignment after you install everthing. Shoudlnt be more than $100 for a proper alignment.
 
The reason I recommend concentrix is they allow the shop to have full adjustment.

Sent from the road while ignoring traffic
 
So do the stempf ones. That's the only one's we use at the alignment shop I work at.
 
My apologies I thought concentrix was a part name not brand name.

Sent from the road while ignoring traffic
 
i couldnt even find the concentrix ones.. i just got standard 3Deg. ones.. will those work?
 
Post up the link to where you purchased them.
 
I ordered them in store from napa.. They were the 3 1/4 deg camber bushings for my BII.
 
You must log in or register to reply here.

Sponsored Ad

TRS Events & Gatherings

Where We Were in 2025 – The Ranger Station

Latest posts

Featured Rangers

Want to see your truck here? Share your photos and details in the forum.

TRS Latest Video

Official TRS Merchandise

Follow TRS On Instagram

Latest Album Photos

IMG_4690.JPEG
IMG_4689.JPEG
IMG_4688.JPEG
IMG_4679.JPEG
IMG_4656.JPEG
IMG_4625.JPEG
IMG_4562.JPEG
IMG_4561.JPEG
IMG_4560.JPEG
IMG_4559.JPEG
IMG_4558.JPEG
IMG_4445.JPEG

Product Suggestions

Back
Top