- Joined
- Jan 27, 2008
- Messages
- 145
- Points
- 3,101
- Vehicle Year
- 97,79,87
- Transmission
- Automatic
So I was going to check my oil today in my ranger, take the stick out, then go to put it back in, and it wouldn't go all the way back in. I've tried turning and positioning it every way possible. I've never had a problem with this before. It's got a 302 in it.
And with my head lights, about 2 months ago, one morning my head lights wouldn't turn on. The high beams still work, marker and signal lights still work. I've checked the fuses, the wiring to the back of the head lights themselves. I went out and bought 2 new head lights, and they worked again. This problem just happened again tonite. Any ideas on why this might be happening ?
Any tips would be greatly appreciated.
And with my head lights, about 2 months ago, one morning my head lights wouldn't turn on. The high beams still work, marker and signal lights still work. I've checked the fuses, the wiring to the back of the head lights themselves. I went out and bought 2 new head lights, and they worked again. This problem just happened again tonite. Any ideas on why this might be happening ?
Any tips would be greatly appreciated.
