surratt
New Member
- Joined
- Mar 28, 2010
- Messages
- 150
- Reaction score
- 1
- Points
- 0
- Transmission
- Automatic
well i decided to make my factory tube bumper or whats left of it a little more functional and stronger, plus the tubes were rusted out. I called a local steelyard and bingo they had some scrap 3 1/2 inch diameter 1/4 inch thin beefy tubular steel.... for FREE! so i replaced my puny 3 inch thin walled tubes with that. I welded some tow hooks at the bottom and also another tube to provide some rigidity when getting yanked. Welded everything up including the brush guard so no bolts and this thing is super beefy now!