97 Front Rotor Thickness
- Thread starter DanVB1
- Start date
Sasquatch_Ryda
TRS Staff - Retired
Forum Staff - Retired
Ford Technician
OTOTM Winner
Solid Axle Swap
- Joined
- Aug 8, 2007
- Messages
- 7,916
- Points
- 3,101
- Age
- 38
- City
- Terrace, BC, Canada
- Vehicle Year
- 1991
- Engine
- 4.0 V6
- Transmission
- Automatic
- Tire Size
- 40s
Min thickness is 24.5mm or 0.96" for a 2wd front rotor
- Joined
- Oct 24, 2007
- Messages
- 33
- Points
- 3,101
- Age
- 67
- Vehicle Year
- 1997
- Transmission
- Automatic
Thanks Sasquatch!
It's a good a thing I bought new rotors from Advance Auto, mine were about 0.940". Driver's side was scored, the pad wore down to the metal before I was able to change.
I figured by the time I had the old rotors resurfaced, they would be thin + the grinding cost, it would be better to buy new. I had 141K on them. Also put in new Timken bearings and Wagner Thermoquiet pads.
Stops great now!
It's a good a thing I bought new rotors from Advance Auto, mine were about 0.940". Driver's side was scored, the pad wore down to the metal before I was able to change.
I figured by the time I had the old rotors resurfaced, they would be thin + the grinding cost, it would be better to buy new. I had 141K on them. Also put in new Timken bearings and Wagner Thermoquiet pads.
Stops great now!
Sponsored Ad
TRS Events & Gatherings
Latest posts
-
-
-
-
-
Specific Radio Boss (note not Bose, but Boss) 632UAB
- Latest: Li'l Work Truck
-
-
-
-
Finally getting round to some body work...- Latest: rumblecloud
Featured Rangers
TRS Latest Video
Official TRS Merchandise
Follow TRS On Instagram
