primer question.


chrwilkins30

15+ Year Member

Joined
Jul 8, 2010
Messages
1,720
Points
3,101
City
Mishawaka, Indiana
Vehicle Year
1988
Transmission
Manual
sand blasting my front fenders on Monday before installing fender flares and i need to know which primer to put on them.
it will be down to bare metal and is just being rattle caned. which one do i get. they have different ones and just not sure.

Getting gloss black on top of the primer.

Thanks for any reply's.
 
Primer paint

sand blasting my front fenders on Monday before installing fender flares and i need to know which primer to put on them.
it will be down to bare metal and is just being rattle caned. which one do i get. they have different ones and just not sure.

Getting gloss black on top of the primer.

Thanks for any reply's.

I'd use Rustoleum primer on the bare metal. maybe 2-3 coats,, either spray or brush on. I have same model and yr but mine was 2 tone brown,, rattle canned it with the new Hammered black paint as 1st coat then going to electric spray gun for finish coat. Its cross between flat black and gloss black. call it my Night Rider,,haha.:icon_pepsi: Nice BII!!
 
Dont use regular primer on that bare metal you need to etch it first or use self etching primer. The the metal etch usually can be had at any home improvement place and the primer at your local parts store.

primer question.


primer question.



If you use the metal etch be careful and read the directions, its basicaly acid so you need gloves, eye protection and ventilation.
 
so,

step1. self-ethcing primer
Step2. regular primer
step3 black paint

Do I even have to use regular primer.
 

Sponsored Ad

TRS Events & Gatherings

Featured Rangers

Want to see your truck here? Share your photos and details in the forum.

TRS Latest Video

Official TRS Merchandise

Follow TRS On Instagram


Product Suggestions

Back
Top