• Welcome Visitor! Please take a few seconds and Register for our forum. Even if you don't want to post, you can still 'Like' and react to posts.

ajmiller's 89 Ranger build


ajmiller

New Member
Joined
Aug 24, 2009
Messages
209
Reaction score
3
Points
0
Location
Hubbard, Oregon
Vehicle Year
1989
Make / Model
Ford
Engine Size
2.9L V6
Transmission
Manual

Only Before pic i had


Jacked up ready to be lifted.




Radius arm drop bracket


New coil






Pittman arm


Done












New wheels and tires! 31 10.50 R15 Kelly Safari TSR






Tried to level the rear end by jacking it up with the trailer =] Need new shackles for the back. Also thinking about doing line x all the way back to cover up that red and not have to worry about paint. Also getting 4.10 gears and a detroit for the rear end. Also wanting a new front bumper with a winch. Canopy also for camping, and lots more. I wish money grew on trees =[
 


ajmiller

New Member
Joined
Aug 24, 2009
Messages
209
Reaction score
3
Points
0
Location
Hubbard, Oregon
Vehicle Year
1989
Make / Model
Ford
Engine Size
2.9L V6
Transmission
Manual
Sorry i didnt have many pictures of the lift being installed, especially in the rear. Leafs are too easy to install anyways =] Ill have more pictures up soon!
 

gjm4l

Member
Joined
Jun 4, 2009
Messages
468
Reaction score
9
Points
18
Location
Jackson County, NC
Vehicle Year
2011
Make / Model
Ford
Engine Size
2.3L 4cyl
Transmission
Manual
Lookin great. Really dig those black KMC's. I think some bedliner would look great!
 

ajmiller

New Member
Joined
Aug 24, 2009
Messages
209
Reaction score
3
Points
0
Location
Hubbard, Oregon
Vehicle Year
1989
Make / Model
Ford
Engine Size
2.9L V6
Transmission
Manual
Yeah i got that set of KMC's cause they were on sale for a limited time. The wheels and tires were like 1400 bucks, huge dent in my pocket lol but im hoping the line x would look good, ive been trying to find someone who has had it done on here but no luck.
 

dangerranger83

5.0 HO under the hood!!!
Supporting Member
V8 Engine Swap
Solid Axle Swap
Joined
Apr 26, 2009
Messages
7,738
Reaction score
54
Points
0
Location
Lafayette, IN
Vehicle Year
1983
Make / Model
Ford
Engine Size
5.0 HO carbed with an np435 and np208
Transmission
Manual
If the rear doesnt have an 8.8, I would put one in and not put money into a 7.5.

Looks good.
 

ajmiller

New Member
Joined
Aug 24, 2009
Messages
209
Reaction score
3
Points
0
Location
Hubbard, Oregon
Vehicle Year
1989
Make / Model
Ford
Engine Size
2.9L V6
Transmission
Manual
Im not worried about the rear end breaking, since i only really wheel in the snow, i am just worried about running 31's with the dana 28 up front. I will most likely throw a dana 35 up front before i break this one.
 

88_Eddie

Well-Known Member
Solid Axle Swap
Joined
Oct 1, 2009
Messages
6,610
Reaction score
155
Points
63
Location
Raleigh, NC
Vehicle Year
1988, 2000
Make / Model
Ford
Engine Size
2.9L, 4.0L
Transmission
Manual
if you're not really planning to wheel, 31's on stock axles should be fine. but by all means, upgrade if you wanna upgrade. nice truck btw
 

ajmiller

New Member
Joined
Aug 24, 2009
Messages
209
Reaction score
3
Points
0
Location
Hubbard, Oregon
Vehicle Year
1989
Make / Model
Ford
Engine Size
2.9L V6
Transmission
Manual
I wont upgrade until i break this dana 28. I know they are not very strong, but correct me if im wrong, the Dana 28 is made to handle 31's? Im not worried, and if it breaks, it breaks, then ill pull a 35. And thanks for the comments!
 

Viva*the*Ranger

New Member
Joined
Nov 1, 2008
Messages
2,108
Reaction score
43
Points
0
Location
Bellingham, Wa.
Vehicle Year
2003
Make / Model
Ford
Engine Size
4.0
Transmission
Automatic
Looking great man! I definitely wouldn't spend the money for gears in the D28. If you're going to regear, do yourself a favor, and snag a D35, and put the money in to that. You're gona snap axle shafts in that D28 with 31's if you're pushing it, guaranteed. The 7.5 should be fine though.

Good work. Keep it up!
 

dangerranger83

5.0 HO under the hood!!!
Supporting Member
V8 Engine Swap
Solid Axle Swap
Joined
Apr 26, 2009
Messages
7,738
Reaction score
54
Points
0
Location
Lafayette, IN
Vehicle Year
1983
Make / Model
Ford
Engine Size
5.0 HO carbed with an np435 and np208
Transmission
Manual
I have seen stock tires break D28 shafts just in 4wd and the guy wasnt wheeling, just hauling a bit of fire wood at 5mph and took a turn and ripped the u-joint ear. Good thing I had my old D28 still and traded him a shaft for headers since all his JY were covered in snow.

I do agree, 31's plus D28 will break a shaft sooner or later. I wouldnt put any money into the turd of a D28. Theres a reason why ford upgraded later on down the road.

The first thing to go on the 7.5 will be the spider gears but should be fine for snow wheeling.
 

ajmiller

New Member
Joined
Aug 24, 2009
Messages
209
Reaction score
3
Points
0
Location
Hubbard, Oregon
Vehicle Year
1989
Make / Model
Ford
Engine Size
2.9L V6
Transmission
Manual
The D28 will have to be upgraded, the 7.5 im not worried about since they put them in mustangs. If it breaks, then ill put a 8.8 in, but until then ill go without it. Thanks for the advice though. Hopefully i can get to it soon.
 

dangerranger83

5.0 HO under the hood!!!
Supporting Member
V8 Engine Swap
Solid Axle Swap
Joined
Apr 26, 2009
Messages
7,738
Reaction score
54
Points
0
Location
Lafayette, IN
Vehicle Year
1983
Make / Model
Ford
Engine Size
5.0 HO carbed with an np435 and np208
Transmission
Manual
I regret not going out and destroying my D28 but then again if I had, then I wouldnt have been able to get my headers either....but then again I would have gone out a froze my ass off in a JY to get an axle shaft too...
 

ajmiller

New Member
Joined
Aug 24, 2009
Messages
209
Reaction score
3
Points
0
Location
Hubbard, Oregon
Vehicle Year
1989
Make / Model
Ford
Engine Size
2.9L V6
Transmission
Manual
Haha yeah i always love carnage =] But if you got headers out of it thats a great deal.
 

dangerranger83

5.0 HO under the hood!!!
Supporting Member
V8 Engine Swap
Solid Axle Swap
Joined
Apr 26, 2009
Messages
7,738
Reaction score
54
Points
0
Location
Lafayette, IN
Vehicle Year
1983
Make / Model
Ford
Engine Size
5.0 HO carbed with an np435 and np208
Transmission
Manual
Ya just got them puut on a couple weeks ago and they actually sound nice on a factory exhaust system but want more so going to play around with the exhaust system and see what that does.
 

Sponsored Ad


Sponsored Ad

Staff online

Member & Vendor Upgrades

For a small yearly donation, you can support this forum and receive a 'Supporting Member' banner, or become a 'Supporting Vendor' and promote your products here. Click the banner to find out how.

Truck of The Month


Shran
April Truck of The Month

Recently Featured

Want to see your truck here? Share your photos and details in the forum.

Follow TRS On Instagram

TRS Events

25th Anniversary Sponsors

Check Out The TRS Store


Sponsored Ad


Sponsored Ad

Sponsored Ad


Amazon Deals

Top