Help with gettin info.

jarfly · May 5, 2011

So bordem took over today and started tryin to find some info on my truck(mainley what gears and such). So I looked at the sticker on the door but seen my door has been changed befor. and no tag on the rear so Is there any way to get this info thro my vin number?

shane96ranger · May 5, 2011

jarfly said:
So bordem took over today and started tryin to find some info on my truck(mainley what gears and such). So I looked at the sticker on the door but seen my door has been changed befor. and no tag on the rear so Is there any way to get this info thro my vin number?

I'm pretty sure the dealer can tell you anything off of the VIN. There are some Ford Techs on here that can tell you just how detailed. But I think the VIN tells all at the dealer.

However, if you just want the gears then this link should get you where you're going:

http://www.therangerstation.com/tech_library/Axles.html

EDIT: You will have to read the tag on the rear diff. The link shows an example in the top pic.

wrecking-crew · May 5, 2011

To find the rear ratio, put the vehicle in neutral and mark one tire with chalk and a piece of tape on the bedside above the mark. Jack up the rear after blocking the front tires and bring a friend. Spin the tire opposite to the marked tire slowly. How ever much it rotates past the tape, is the ratio.
Example, 3 turns past the tape and about 3/4 of a revolution nearing the tape, most likely is a 3.73. Not exact science, but just compare it to a list of ratios the truck came with.

Help with gettin info.

jarfly

15+ Year Member

shane96ranger

15+ Year Member

wrecking-crew

15+ Year Member

Sponsored Ad

TRS Events & Gatherings

Latest posts

Featured Rangers

TRS Latest Video

Official TRS Merchandise

Follow TRS On Instagram

Latest Album Photos

Product Suggestions