tmanes123
Member
Hi,
My automatic trans column shifter is wobbly. I've already tightened the bracket bolts at the bottom of the shift tube.
Also, it seems to wobble in a way that mostly rotates around an axis rather than side to side or up and down. I've checked the play in the tube to see if the bushings were bad, but it doesn't seem like there's anywhere near enough p[lay to cause this. I remember when it first happened it was fine one day and then the next day the shifter "sagged" out of the park position causing the ignition switch to not want to release the key. This also leads me to believe that it isn't the bushings because it was a sudden change instead of slowly happening over time.
Is there any adjustment in the linkage beyond the bolted bracket that usually needs tightening?? Any thoughts would be greatly appreciated.
My automatic trans column shifter is wobbly. I've already tightened the bracket bolts at the bottom of the shift tube.
Also, it seems to wobble in a way that mostly rotates around an axis rather than side to side or up and down. I've checked the play in the tube to see if the bushings were bad, but it doesn't seem like there's anywhere near enough p[lay to cause this. I remember when it first happened it was fine one day and then the next day the shifter "sagged" out of the park position causing the ignition switch to not want to release the key. This also leads me to believe that it isn't the bushings because it was a sudden change instead of slowly happening over time.
Is there any adjustment in the linkage beyond the bolted bracket that usually needs tightening?? Any thoughts would be greatly appreciated.