what regear tools

[natmanjoh]

if i were to do a regear on my own, what specialty tools would i have to have that wouldn't be in the average garage. i've looked at ringpinion.com and got a little confused on what is actually needed, and what would just be a convenience to have. thanks!

 

[rngmStr]

pinion depth gauge and dial indicator to name a few

 

[natmanjoh]

thanks for the help rngmstr. i did some more digging and found a complete parts list. parts are pretty pricey. i'm thinking i might be better off just having the shop do it.

 

[RICO9]

It's also nice to have a press.

 

[Jay W]

bearing puller
hydraulic press
micrometer or calipers
gear marking compound

 

[Explorin94]

One thing that no one esle mentioned......Patients and lots of it!

 

[RangerSVT]

pinion depth gauge
dial indicator

bearing puller
hydraulic press
micrometer or calipers
gear marking compound

Patients and lots of it!

A good torque wrench
Preferably a parts washer (but not required)
A good work bench (bending over all the time sucks)
SVT

 

[dla]

Inch pound torque wrench. Magnetic base & dial indicator. A 1 1/16 socket. 12 point 12mm socket. 6 point 8mm socket. A 3' breaker bar. A 3' x 2" x 1/4" flat stock with 2 holes drilled to match the flange bolts. A 6" dial indicator with depth gauge.

 

[daniel3507]

thanks for the help rngmstr. i did some more digging and found a complete parts list. parts are pretty pricey. i'm thinking i might be better off just having the shop do it.

Go with this idea

Sent from my LS670 using Tapatalk