What kind of shocks do I need to buy?

[SamC777]

1994 XLT 4x4. Not sure what kind of shocks I need. Those part numbers (740075, 740085) aren't popping up with anything. Rear lift measures 25" from wheel center to the arch and 23" in the front

<front - rear>

 

[Uncle Gump]

I popped Rough Country in before your part number.

These are for a 2 1/2 - 5 inch lift.

Scroll to the bottom and it give shock specs... might want to measure what you have and compare.

N3 Rear Shocks | 2.5-5" | Ford Ranger 2WD/4WD (1983-2011)

Improve your ride with Rough Country's N3 shocks, featuring 10-stage variable valving, high-pressure nitrogen, and durable construction for off-road and highway performance.

www.roughcountry.com

 

[ThatOneGuy]

Get air shocks I love the way they ride

 

[gaz]

@SamC777 ,
I 100% recommend calling James Duff LLC to learn more about their 70/30 shocks and dual shock kits. Tell them what you have, they will have you take a couple measurements, they are great to work with.

Ultimately, if you desire to have a MUCH safer driving experience, with virtually zero body roll, look into their dual shock set up. Use dual 70/30 shocks both front and rear, it is just plain magicical how they control body roll.

When turning the inside 2 shocks extending with 30% resistance each, equate to approximately a single 50/50 shock while the 2 outside turn shocks with 70% resistance to compression function as a triple 50/50 shock setup!!! While driving strait they all are 70% resistance to compression and 30% resistance to extension. Makes for a very smooth, controlled driving experience.