kirk3000
Well-Known Member
I think the bolts are 1/2" and 1-1.5 inches long. The tech library has it listed.
-
Welcome Visitor! Please take a few seconds and Register
for our forum. Even if you don't want to post, you can still 'Like' and react to posts.
what is need to do for flipping the shackles?
- Thread starter dniksch
- Start date
Ranger SVO
Well-Known Member
The bolts are 7/16-inch by 1-inch long. I used a lock washer plus a self locking nut. The tech library says use a 3/8, but the 7/16 fits the holes much tighter.
kirk3000
Well-Known Member
You're right. I was thinking of the bolts for the front hanger.
claws69
Member
after flipping the shackles' did you change out the shocks too?
Ranger SVO
Well-Known Member
No, I did not change the shocks. I did change the sway bar bushings while the bed was off.
Similar threads
Sponsored Ad
Sponsored Ad
TRS Events
Member & Vendor Upgrades
For a small yearly donation, you can support this forum and receive a 'Supporting Member' banner, or become a 'Supporting Vendor' and promote your products here. Click the banner to find out how.
Recently Featured
Ranger Adventure Video
TRS Merchandise
Follow TRS On Instagram
