Superlift Superrunner Steering System 1024 will work with my 96 Ranger XLT 4x4 4.0?

[RangerRough]

https://www.summitracing.com/parts/...MInpbvh_Gf5AIVGMpkCh2njQYREAYYASABEgKgx_D_BwE

Does anyone know if this custom steering will work with my 96 ranger xlt 4x4 4.0? says its for the bronco II and f-150, those trucks use the same exact TTB as my ranger correct? Dana 35 TTB. Any info would be excellent!

 

[BlackBII]

Your Ranger has a Dana 35 TTB, yes. The F-150 uses a larger version of the TTB; the Dana 44

Superlift part number 1024 is listed as fitting the F-150/Bronco

Superlift part number 1134 is the one that should fit the Ranger/Bronco II

The one you posted will likely be too large/wide, as it's designed to fit on the F-150. If you have some fab skills you may be able to make it work as it looks like the 1134 part number is no longer available

 

[RangerRough]

Bummer! Are there any other pre-fabricated steering kits like this one on the market that you know of? Really wanna get rid of the ttb steering monstrosity. Also, i was thinking if i should change my steering box as well since i will be pulling the pitman arm off anyways. I saw an ARG PERFORMANCE box for $323 originally $450

 

[Shran]

Seems to me that the RBV super runner kit is out of production now... it's not on their website. I always wanted one.

Wouldn't bother changing out the steering box unless it's loose or leaking. You can pick up a reman box for about $100 if you shop around carefully.

 

[4x4junkie]

WTF!???

 

[RangerRough]

what?