Welcome Visitor! Please take a few seconds and Hi all! I'm converting my 1990 2.3L XLT to an electric fan setup. I have the relays and harness, and am looking for opinions and advice as to where I should tap in for the accessory wire to the relay.
The main fan power is standalone and fused, capable of 40 amps. I just need a small source for 12V and 1 amp or so that is keyed.
It needs to be on when the truck is running, but off when it isn't, similar to a radio.
I'm hoping that there's an unused or under used junction in the Power Distribution Box under-hood.
That would save me the hassle of running one wire from the relay through the firewall. Thanks for any and all suggestions!
The main fan power is standalone and fused, capable of 40 amps. I just need a small source for 12V and 1 amp or so that is keyed.
It needs to be on when the truck is running, but off when it isn't, similar to a radio.
I'm hoping that there's an unused or under used junction in the Power Distribution Box under-hood.
That would save me the hassle of running one wire from the relay through the firewall. Thanks for any and all suggestions!
