need some help to know if a ttb dana 44 will bolt onto my ranger

[tyler1983ranger]

hello i just got a ttb dana 44 and need to know if it will bolt on to my truck and if there is anyth special i would need to do to make it fit . my trucks a 83 and has a 6 inch lift in the front so if you know anything . thanks

 

[RangerSVT]

This has been discussed and been done, it can be bolted up, but will sick out on both sides, as well as the springs will be at an angle due to the mounting places on the beams are not directly under the coil buckets
SVT

 

[dangerranger83]

A D35 is a 99% bolt on thing.

 

[Beanmachine7000]

A D35 is a 99% bolt on thing.

A D35 is also 99% a D44

 

[4x4junkie]

Perhaps he wants the wider width?

Like said, search back a ways, there have been several discussions about TTB D44 swaps in the past

 

[BlackBII]

There's also these
http://www.therangerstation.com/tech_library/Dana44TTBconversion.htm
http://www.therangerstation.com/tech_library/Dana44TTB.htm

 

[kris97ranger]

for the springs being on an angle could you move the mounting pads on the i beam over? so its in the right spot to have the spring straight
________
BigNipples live

 

[dangerranger83]

for the springs being on an angle could you move the mounting pads on the i beam over? so its in the right spot to have the spring straight

Ya what says you can't. I'd do that.

 

[kris97ranger]

wasnt sure it seems to make more scense to me to do it that way.
________
Prilosec pregnancy