Need Help with Positive camber 90 ranger 2WD

[tomas812]

Hello my fellow ranger buddy, I need you guys to bail me again. I lifted my truck and followed the instruction by ( Lifting Your Ranger On A Budget) By 4x4 Junkie



now i realize i have a positive camber. ( \--/ ) i need to correct this issue .

I spoke to Travis Gaylord at My4x4Store.com .and he suggested I install Pro Comp Camber kit 594 . Hope some one could help me out.
Thanks
Tommy

 

[doorgunner]

maybe the tie-rods are trying to hold the wheels in their original position and won't let the wheels settle into their new "tracks"....along with the need to change the camber bushings.....

 

[Nick]

need camber shim help

:yahoo::yahoo::icon_pepsi:

ok i got a 90 ranger 2wd and i made custom 2 in lift blocke out of round stock with a 3/4 hole. then i put it all together with the stock spacer and rubber thing for the spring. i used 10 x 3/4 concrete lag bolts grade 5. heated the end with a torch and hammered them into a fat plug on the end that goes into the concrete. then ran it up from the bottom. crazy but it works. now the tow out is a bit but not bad. what shims are normally used to correct this?

 

[Nick]

is the pro comp camber part at $58 include a zero to 3 deg shim?

 

[Nick]

need camber shim help

:yahoo::yahoo::icon_pepsi:

ok i got a 90 ranger 2wd and i made custom 2 in lift blocke out of round stock with a 3/4 hole. then i put it all together with the stock spacer and rubber thing for the spring. i used 10 x 3/4 concrete lag bolts grade 5. heated the end with a torch and hammered them into a fat plug on the end that goes into the concrete. then ran it up from the bottom. crazy but it works. now the tow out is a bit but not bad. what shims are normally used to correct this?

 

[tomas812]

Hi Doorgunner, IM lost do you maybe i should try adjusting the tie rods.
thank you tommy