need help finding door hinge pin and bushing kit

[87RangerXLTct]

tried rock auto,autozone, advance and some other parts stores and nobody lists a door hinge pin and bushing kit for a 1987 ford ranger. My drivers door is sagging and i'd like to fix it. anybody replace there hinge pins on a early ranger or bronco II and have a part number that will definitely work?Thanks

 

[MastuhWaffles]

Is this what your looking for?
http://www.1aauto.com/hinge-pin-with-roller/i/1admx00083?f=467194&y=1987&utm_campaign=gb_csv_br&utm_content=DMX&gclid=Cj0KEQiA1qajBRC_6MO49cqDxbYBEiQAiCl5_Gg50h1ueAk3YddqKCj6Dpq-_dF-dDJTeYKIaquYOFcaAmm58P8HAQ

 

[87RangerXLTct]

nope thats the roller. I need the hinge pins and brass or bronze bushings usually come 2 pins and 4 bushings in a kit. I've done this repair on my road runner and had a easier time finding a kit for that then I did my ranger.

 

[alwaysFlOoReD]

I seem to remember seeing a generic kit in the "HELP" section of my local parts place.

 

[BLOODBANE]

My Explorer did this a few years ago. I found it easier to hit a local Junkyard and get the whole hinge. Unbolt the old, put the better one in and go.

 

[Mark_88]

^This...

I recently swapped the doors on my 88 with some from a 92...main reason...the 88 had a broken part that I could not otherwise replace...it was the lock open tab on the inside of the lower hinge...this prevents the door from closing on you and/or cracking your shins...

The whole hinges are also available in Canada last time I checked...and the price wasn't too bad...under $50 IIRC...when you compare that to the hours you spend driving around to parts places, gas, food...well, you know how it can add up!

 

[hank857]

Dont know if this will help they are listed for 93 on:

http://www.lmctruck.com/icatalog/fr/full.aspx?Page=16

 

[TxGasRacer]

http://www.ebay.com/sch/i.html?_fro...=1987+Ford+Ranger+door+hinge+pin+kit&_sacat=0