Need help finding a part name / #

[snatale42]

Ok feel a little stupid on this one, I need to replace the (hose) between the plenum and PCV valve but don't know what it's called. I called Ford and explained it to them and they want like $70 but It's hard to find aftermarket when you don't know what your looking for. Any help would be great 02 Ranger 3.0 Flex

 

[disciplerocks]

Just take it into Autozone and they can cut you a piece the same diameter. It won't be molded, but at less than a $1 a foot you can really complain.

 

[Rearanger]

It won't be molded,

Could be a problem if bend is too severe and non-molded hose collapses. Parts store should/may be able to match with molded if you take part in.

 

[t0x1k]

Buy the hose from the parts store by the foot. It's just a breather tube, there's not a lot of vacuum so it won't collapse itself. I use 1/2 ID heater hose when I did my body lift.
If anything, find a long coil spring that's 1/2" od and slip it inside the hose. They do this with universal radiator hoses.

 

[Rearanger]

Buy the hose from the parts store by the foot. It's just a breather tube, there's not a lot of vacuum so it won't collapse itself.

Au contraire, it will collapse, especially when it's hot. There is a lot of vacuum in the hose from the PCV to the intake, if that's the hose he means.

 

[JP02XLT]

You can buy PVC fittings (45 -90) for any turns you need to make. I cant believe Ford wants $70 for that piece of crap hose that gets hard and brittle, and quickly breaks.

JP02XLT