Welcome Visitor! Please take a few seconds and I have been planning to do this swap for a long time. My 3 liter motor finally went out on me last fall and its finally warming up enough to get to work on it this spring. I pulled a carbed 302 from an 80's mustang that blew the auto tranny, it supposedly was built mean(and it sounds like it is). My rangers motor tranny and that sort of stuff is pulled now too. I should be getting a wrecked f150 with the 300 6cylinder with a five speed and transfercase to put behind my 302 in the next few days. I have been reading other peoples questions and looking at stuff on here and i know i will have many questions along the way.
Im just hopping im not starting off the wrong way with my engine transmission and transfercase setup. after i get them all in place i can start on the other stuff. any suggestions or any tips that might make the whole engine swap easier from the beggining will be much apreciated
Im just hopping im not starting off the wrong way with my engine transmission and transfercase setup. after i get them all in place i can start on the other stuff. any suggestions or any tips that might make the whole engine swap easier from the beggining will be much apreciated
