rangerman2020
Member
Hello, I have a 1992 ford ranger xlt 60k miles. The frame is 50% rusty but not bad at all, just light surface rust (you can still see the original paint from the frame). The parts that aren't rusted are coated in dirt/oil. Some steering components are rusted as well. I have the bed detached and am ready to start removing rust/painting it. Other than old gas in it right now, the only things things that need to be addressed are:
1. Leaf spring bushings/mounting brackets
2. Shock absorbers (I have those already)
3. Valve cover gasket (starting to leak a little)
4. Differential gasket/fluid change
5. New tires/wheels
These have been replaced:
1. Spark plugs/wires
2. Transmission fluid/pan gasket/filter
3. Oil/filter
4. Transmission cooler lines
5. Radiator/Heater hoses
6. U joints
Am I just wasting my time?
1. Leaf spring bushings/mounting brackets
2. Shock absorbers (I have those already)
3. Valve cover gasket (starting to leak a little)
4. Differential gasket/fluid change
5. New tires/wheels
These have been replaced:
1. Spark plugs/wires
2. Transmission fluid/pan gasket/filter
3. Oil/filter
4. Transmission cooler lines
5. Radiator/Heater hoses
6. U joints
Am I just wasting my time?