99RangerBoss
Well-Known Member
Hey everyone, im doing a new front end job on my edge, bj's, UCA's, tie rods etc, and so im wondering how do you know when your inner tie rod ends are shot?
-
Welcome Visitor! Please take a few seconds and Register
for our forum. Even if you don't want to post, you can still 'Like' and react to posts.
Inner tie rods
- Thread starter 99RangerBoss
- Start date
When they have excessive play in them.
You'll need a $pecial tool to replace them.
I replaced a notchy steering rack at about 90k miles (2000 4wd).
The inners were still rock solid.
Many alignment shops will inspect your junk for free.
Racks cost about $200. Just about what you'd pay in parts and labor for new inners, unless you buy/rent the tool.
Just sayin'.
You'll need a $pecial tool to replace them.
I replaced a notchy steering rack at about 90k miles (2000 4wd).
The inners were still rock solid.
Many alignment shops will inspect your junk for free.
Racks cost about $200. Just about what you'd pay in parts and labor for new inners, unless you buy/rent the tool.
Just sayin'.
Similar threads
Sponsored Ad
Sponsored Ad
TRS Events
Member & Vendor Upgrades
For a small yearly donation, you can support this forum and receive a 'Supporting Member' banner, or become a 'Supporting Vendor' and promote your products here. Click the banner to find out how.
Recently Featured
Ranger Adventure Video
TRS Merchandise
Follow TRS On Instagram
