how do you have your aftermarket muffler hung and clamped?

[Heavyfire14]

basically im putting on a turbo muffler and letting it dump under the bed and i dont have access to a welder so im clamping it on to the stock exhaust right after the resonater but i cant figure out how and where to mount the hangers . any help pictures are greatly appreciated.

 

[clvanhorn]

easiest way is to buy an exhaust hangar from your local auto parts store and use a self tapper to hang it, and then bolt it to your exhaust... me and my buddies have done that a lot of times but obviously you have to make sure its not in a spot that pokes thru your floor.

 

[Heavyfire14]

thats what i was thinking, i just wanna see some pictures to get a better idea

 

[Will]

I just use one hanger on the end of my tractor muffler with the hanger welded to the x-member.

 

[Heavyfire14]

lol, and i can only do bolt on right now

 

[Rose2300]

I drilled a small hole in that crossmember deal right above the muffler outlet, then bolted the hanger to that and the other end on an exhaust clamp around the outlet. ill try to get a pic tommoror

 

[Heavyfire14]

ok thanks